ALFAPOL
ALFAPOL TOP KORUND — corundum dry topping for concrete
Dry trowelling mix with corundum aggregate for wear-resistant floors in production facilities and car parks: 70 MPa, abrasion up to 0.3 g/cm².
Price on request
ALFAPOL
ALFAPOL PU-2ASKh — chemical-resistant antistatic polyurethane self-levelling floor
A chemical-resistant modification of the antistatic polyurethane self-levelling floor: a tinted solvent-free compound with quartz filler. Electrical resistance of the coating is below 10⁶ Ω, Shore D hardness from 70, Taber abrasion no more than 60 mg, service from −30 to +50 °C. The material is designed for production, food and pharmaceutical premises; it is laid at +15…+30 °C and relative air humidity not above 60%.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | polyurethane floors |
| Use | production halls, food and pharmaceutical, chemically resistant, antistatic/conductive |
| Base | polyurethane; Polyurethane antistatic chemical-resistant self-levelling coating, industrial floor |
| Colour | Self-levelling tinted solvent-free compound |
| Packaging | Metal containers: Component A - 20 kg. Component B - 4.6 kg. Component C (graded quartz filler 0.1-0.4 mm) - 25 kg bag. |
| Application temperature | Application temperature, °C: +15°C to +30°C; Substrate moisture, max.: 5%; Relative air humidity, max.: 60% |
| Curing | At 10 / 20 / 30 °C: foot traffic after 3 / 2 / 1 days, medium load after 7 / 5 / 3 days, full load after 10 / 7 / 5 days; Recoat interval, h, min.: 12; Foot traffic, h, min.: 24; Full cure, days, min.: 7 |
| Key properties | Shore D hardness, min.: 70; Taber abrasion (CS10/1000 g/1000 rev), max., mg: 60; Bond strength to concrete (failure in concrete), min., MPa: 2; Point-to-point resistance, less than, Ohm: 10^6; Resistance to ground point, less than, Ohm: 10^6; Service temperature, °C: from -30 to +50 |
| Consumption | for 1 mm thickness: 1.45 kg/m² of compound. CONSUMPTION for 2 mm thickness (with quartz sand 1:0.5): 2.2 kg/m² of compound + 1.1 kg/m² of sand (0.1-0.4 mm) |
| Shelf life | Shelf life in unopened factory packaging - 6 months from the date of manufacture.; Shelf life, months: 6 |
| Standards | TU 20.16.56-002-82166262-2016 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL EP-2 — epoxy self-levelling floor
Solvent-free self-levelling epoxy floor for workshops, retail and public buildings, resistant to water and chemical media.
Price on request
ALFAPOL
ALFAPOL EP-3D — clear epoxy self-levelling floor for 3D coatings
Clear solvent-free, odourless epoxy self-levelling floor for 3D floors and decorative coatings in public and retail buildings.
Price on request
ALFAPOL
ALFAPOL EP-3V — matt water-based epoxy floor paint
Vapour-permeable water-based epoxy paint with a matt finish for workshops and outdoor areas, tinting to RAL.
Price on request
ALFAPOL
ALFAPOL MB GSM — oil- and petrol-resistant magnesia concrete floor
Magnesia concrete floor with crushed granite for workshops, warehouses and car parks, resistant to petrol and mineral oil, class NG.
Price on request
ALFAPOL
ALFAPOL VK GSM — oil- and petrol-resistant cement self-levelling floor
Self-levelling cement floor resistant to petroleum products for workshops and warehouses: abrasion no more than 0.6 g/cm², W8, F300.
Price on request