REKS
REKS GRAUT GP (VSM) — grout under the rail slab of ballastless high-speed track
Low-viscosity R4 cementitious mix for filling the space under the rail slab of ballastless track, machine bases and bolts; 70 MPa at 28 days.
Price on request
REKS
REKS is a brand of OOO SPS that has the most items in the concrete repair and grouting sections. Its repair mortars include the Strukto series of classes R3 and R4, rapid-setting and acid-resistant grades among them, the AR and AR FM grades for spraying, the lightweight OL for ceilings, the BS finishing mortar, the flowable StruktoFluid, Fayber L and Fab-10P, shotcrete mixes, rebar primers and the Epo Uni, EPO INZh and Akva Densit epoxies.
For grouting, there are the cementitious Graut, Litoy, Litoy 110 and Fluid, the Epolit and Fiks Epo epoxies, the Akrisil acrylics, the StruktoLit expansive binder and Grip Ultra for sleepers and posts, and for anchoring, the Fiks Epo Tiks and Fiks Akrep chemical anchors.
Type
Application
REKS
REKS® AKRILIK ELAST VN — acrylic polymer concrete for expansion joints and slab edges
Rapid-hardening highly filled acrylic polymer concrete with a reduced modulus of elasticity for expansion joints, slab edges and sleepers.
Price on request
REKS
REKS® AKRILIK NV — compound for deep impregnation and strengthening of cracked concrete
Impregnating compound of components A and B for restoring the load-bearing capacity of concrete and repairing track concrete; tensile strength from 20 MPa.
Price on request
REKS
REKS® Akrisil L — acrylic grout for equipment and rails, work from −10 °C
Acrylic resin grout for fixing equipment with dynamic loads and rails; applied at temperatures from −10 to +25 °C.
Price on request
REKS
REKS® Akrisil VN — rapid-hardening acrylic polymer concrete for work from −30 °C
Two-component highly filled acrylic resin polymer concrete for bridge bearings, screeds and rails; at least 95 MPa compression after 4 hours.
Price on request
REKS
REKS® Akva Densit — epoxy compound for underwater repair and damp concrete
Epoxy repair compound for damp surfaces and underwater work on hydraulic, port and bridge structures; compression from 50 MPa.
Price on request
REKS
REKS® AR — thixotropic R4 repair mortar for spraying and trowel application
Non-shrink fibre-reinforced R4 mortar in 25 kg bags for repairing bridges, tunnels, dams and columns; compressive strength from 55 MPa at 28 days.
Price on request
REKS
REKS® AR FM — R4 repair mortar for wet spraying, supplied with fibre
Thixotropic class R4 mortar for repairing bridges, tunnels and columns by spraying or trowel; each bag comes with a pail of fibre, flexure from 12 MPa.
Price on request
REKS
REKS® BS — thixotropic R3 mortar for final levelling of concrete
Non-shrink class R3 mortar for a smooth finish on new and repair of old concrete surfaces before protective coatings; aggregate size 0.315 mm.
Price on request
REKS
REKS® EPO INZH — low-viscosity epoxy for injecting cracks in concrete
Two-component epoxy injection resin for filling cracks and pores in concrete and masonry and restoring load-bearing capacity; compression from 70 MPa.
Price on request
REKS
REKS® Epo Uni — thixotropic epoxy adhesive and sealant in Shot and Long versions
Two-component epoxy adhesive-sealant for joints, cracks, minor concrete defects and fixing rebar and anchors; full readiness within 1 day.
Price on request
REKS
REKS® Epolit — three-component epoxy grout for anchor pockets and equipment
Highly filled cold-curing epoxy for filling anchor pockets and grouting under turbines, compressors and pumps; 100 MPa in 7 days.
Price on request
REKS
REKS® Fab-10P — fibre-reinforced concrete mix with crushed granite for pavement repair
Non-shrink R4 concrete mix supplied with crushed granite for repairing airfield and road pavements, industrial floors and bridge piers.
Price on request
REKS
REKS® Fayber L — flowable repair mortar with metal fibre for work down to −10 °C
Rapid-hardening flowable R4 mortar with polymer and brass-coated metal fibre for roads, airfields and bridges; from 30 MPa after 2 hours.
Price on request
REKS
REKS® Fiks Akrep — chemical anchor for installation down to −15 °C
Two-component chemical anchor for rebar, studs and embedded parts in concrete, stone and brick at sub-zero temperatures; 410 ml cartridge.
Price on request
REKS
REKS® FIKS EPO T — two-component epoxy for anchoring and base plates
Multi-purpose epoxy for anchoring bars, bolts and barrier posts, base plates and rails; compressive strength from 90 MPa in 7 days.
Price on request
REKS
REKS® Fiks Epo T/VN — filled epoxy grout in three consistencies
Three-component modified epoxy grout for base plates, bridges, rails and anchoring; the consistency is set by the proportion of filler.
Price on request
REKS
REKS® Fiks Epo T/VN 100 — high-strength epoxy grout with freeze-thaw resistance F1 500
High-strength three-component epoxy grout for bridge bearings, equipment and rails; 80 MPa after just one day in flowable consistency.
Price on request
REKS
REKS® Fiks Epo T/VN ESh — two-component epoxy grout, 98 MPa in 7 days
Two-component high-strength epoxy grout for bridge bearings, equipment, rails and anchoring; 27 kg kit, shelf life 16 months.
Price on request
REKS
REKS® Fiks Epo Tiks — epoxy-based chemical anchor for rebar and studs
Two-component epoxy chemical anchor for bonding rebar, anchors and studs of any diameter into B15–B60 concrete, stone and brick.
Price on request
REKS
REKS® Fiks Epo Tiks O — epoxy chemical anchor in a 380 ml cartridge
Modified epoxy chemical anchor for rebar, studs and embedded parts in concrete, stone and brick; 380 ml coaxial cartridge.
Price on request
REKS
REKS® Fluid — rapid-hardening flowable R4 grout for work down to −10 °C
Fibre-reinforced flowable mix for grouting under bridge bearings and equipment foundations and repairing roads and airfields; 50 MPa after one day.
Price on request
REKS
REKS® Graut 3.0 — rapid-setting fibre-reinforced mortar for chases and joints
Flowable fibre-reinforced R4 mix for fixing cables and pipes in chases and grouting joints and track concrete; 8 MPa compression after 1 hour.
Price on request
REKS
REKS® Graut GP — low-viscosity pourable grout, 75 MPa
Non-shrink low-viscosity R4 grout for machine bases and fixing beams, columns and bolts; from 35 MPa after one day and from 75 MPa at 28 days.
Price on request
REKS
REKS® Graut M — flowable non-shrink R4 grout for machine bases and anchors
Non-shrink highly flowable cementitious mix for grouting machine bases, fixing beams and columns and setting anchors; 60 MPa at 28 days.
Price on request
REKS
REKS® Grip Ultra — dispersed grout for sleepers, posts and rebar
Grout in 19 kg bags for fixing sleepers in track concrete, installing railings and posts and fixing rebar; 10 MPa after 2 hours.
Price on request
REKS
REKS® Litoy — pourable R4 grout for bridge bearings and equipment
Low-viscosity non-shrink cementitious mix for high-precision grouting under columns, bridge spans and equipment foundations; 80 MPa at 28 days.
Price on request
REKS
REKS® Litoy 110 — 110 MPa installation grout for wind turbine towers and equipment
High-strength rapid-hardening Portland cement grout with shrinkage compensators for wind turbines, bridges and equipment; 110 MPa at 28 days.
Price on request
REKS
REKS® Nabryzg — fibre-reinforced class R3 mortar for wet spraying
Non-shrink fibre-reinforced class R3 mortar for repairing concrete and reinforced concrete by wet spraying, including in large volumes; from 35 MPa.
Price on request
REKS
REKS® OL — lightweight thixotropic R3 mortar for repairing soffits
Non-shrink lightweight cementitious R3 mortar for overhead surfaces and extensive concrete damage; density of the hardened mortar 1.5 t/m³.
Price on request
REKS
REKS® PRAYMER — one-component primer for cleaned rebar before concrete repair
One-component primer with corrosion inhibitors for cleaned rebar before concrete repair; supplied in 5 and 10 kg pails and 20 kg bags.
Price on request
REKS
REKS® Praymer Antikor — anti-corrosion rebar primer with corrosion inhibitors
One-component primer with corrosion inhibitors protecting steel rebar during repair of reinforced concrete, including where chlorides are present; 5 and 10 kg pails.
Price on request
REKS
REKS® R3 — class R3 repair mortar, 40 MPa, for interior and exterior work
Non-shrink thixotropic class R3 mortar for local repair and levelling of reinforced concrete in industrial buildings and tanks; compression from 40 MPa.
Price on request
REKS
REKS® R4 — mortar for structural repair of reinforced concrete, 60 MPa
Fibre-reinforced thixotropic class R4 mortar for structural repair of reinforced concrete on vertical, horizontal and overhead surfaces.
Price on request
REKS
REKS® Strukto 100 — thixotropic R4 repair mortar resistant to acidic media
Non-shrink fibre-reinforced R4 mortar for bridges, tunnels, dams and treatment plants, tested for resistance in liquid acidic aggressive media.
Price on request
REKS
REKS® Strukto 300 — rapid-setting R4 mortar for repair and joint filling
Thixotropic class R4 cementitious mortar for fast concrete repair and joint filling in industrial buildings and tunnels; from 30 MPa after one day.
Price on request
REKS
REKS® Strukto 60 — fibre-reinforced thixotropic R4 repair mortar, 60 MPa
Non-shrink fibre-reinforced R4 mortar for repairing bridges, tunnels, dams and columns; compressive strength at 28 days at least 60 MPa.
Price on request
REKS
REKS® Strukto 70 — thixotropic R4 repair mortar, 70 MPa, W20
Fibre-reinforced R4 repair mortar for bridges, dams, tunnels and columns with compressive strength from 70 MPa and water impermeability W20.
Price on request
REKS
REKS® Strukto BS 3 — rapid-hardening thixotropic R4 mortar for work down to −10 °C
Rapid-setting fibre-reinforced R4 mortar for repairing walls and soffits without formwork, including in frost; from 20 MPa compression after 2 hours.
Price on request
REKS
REKS® Strukto R3 — rapid-setting class R3 mortar for repair and levelling
Non-shrink fibre-reinforced R3 mortar for repair, finishing and local levelling of concrete, including precast elements; 35 MPa at 28 days.
Price on request
REKS
REKS® Strukto R4 — rapid-setting fibre-reinforced repair mortar of class R4
Rapid-setting mortar for repairing concrete after rebar corrosion and impact, resistant to liquid acidic media; from 30 MPa compression after one day.
Price on request
REKS
REKS® StruktoFluid — flowable R4 mortar for roads, airfields and machine bases
Rapid-hardening fibre-reinforced flowable R4 mortar for roads, airfields, beams and slabs, machine bases and anchor fixing; compression from 65 MPa.
Price on request
REKS
REKS® StruktoLit — expanding cementitious binder for injection grouts and concrete
Highly flowable expanding binder for shrinkage-compensated mortars and concrete: repair of roads, airfields, bridges and masonry; 20 kg bag.
Price on request
REKS
REKS® Tikso — thixotropic mortar for repairing and levelling concrete and floors
Fibre-reinforced non-shrink mortar for repair, finishing and local levelling of concrete, including floors; flowability is retained from 60 minutes.
Price on request
REKS
REKS® Torkret — dry mix for shotcreting mine workings and concrete
Ready dry mix for dry shotcreting of mine workings, rock bases and damaged concrete, brick and stone; compression from 45 MPa at 28 days.
Price on request
No materials match these filters.