REKS
REKS® Fab-10P — fibre-reinforced concrete mix with crushed granite for pavement repair
Non-shrink R4 concrete mix supplied with crushed granite for repairing airfield and road pavements, industrial floors and bridge piers.
Price on request
REKS
REKS® Graut M — flowable non-shrink R4 grout for machine bases and anchors
Machine bases, fixing of beams and columns, fixing of bolts, anchors and embedded parts, and injection into cavities and ducts are the works REKS® Graut M is intended for. It is a non-shrink highly flowable cementitious mortar of class R4 per GOST R 56378; flowability is retained for at least 30 minutes. Compressive strength is from 30 MPa after one day and 60 MPa at 28 days, bond to the substrate at least 2.1 MPa, freeze-thaw resistance F2 400, water impermeability W16.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | cementitious grouts |
| Use | equipment foundations, anchoring of rebar and bolts, columns and beams |
| Base | non-shrink cementitious repair mortar with high flowability |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | installation of machine bases and fixing of beams and columns; fixing of bolts, anchors and embedded parts; injection into cavities and ducts |
| Application temperature | not below +5 °C |
| Curing | protection from precipitation for at least 24 h; in hot and windy weather — water spraying and covering with film |
| Key properties | modulus of elasticity: ≥25,000 MPa; density of hardened mortar: 2.3 ± 5 % t/m³; freeze-thaw resistance: F2 400; bond to substrate at 28 days: ≥2.1 MPa; water impermeability: W16; compressive strength at 28 days: ≥60 MPa; flexural strength at 1 day: ≥4 MPa; flexural strength at 28 days: ≥7 MPa; bond to substrate at 28 days after 50 freeze-thaw cycles in salts: ≥2.0 MPa; aggregate size: 1.25 mm; flowability retention: ≥30 minutes; flowability (mortar flow trough): 400–500 mm; compressive strength at 1 day: ≥30 MPa; capillary water absorption: no more than 0.4 kg/(m²·min⁰·⁵); sulphate resistance coefficient (365 days): 0.982 % |
| Shelf life | 12 months from the date of manufacture |
| Standards | class R4 per GOST R 56378 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® AR — thixotropic R4 repair mortar for spraying and trowel application
Non-shrink fibre-reinforced R4 mortar in 25 kg bags for repairing bridges, tunnels, dams and columns; compressive strength from 55 MPa at 28 days.
Price on request
REKS
REKS® Fiks Epo Tiks — epoxy-based chemical anchor for rebar and studs
Two-component epoxy chemical anchor for bonding rebar, anchors and studs of any diameter into B15–B60 concrete, stone and brick.
Price on request
REKS
REKS® Fiks Akrep — chemical anchor for installation down to −15 °C
Two-component chemical anchor for rebar, studs and embedded parts in concrete, stone and brick at sub-zero temperatures; 410 ml cartridge.
Price on request
REKS
REKS® Graut GP — low-viscosity pourable grout, 75 MPa
Non-shrink low-viscosity R4 grout for machine bases and fixing beams, columns and bolts; from 35 MPa after one day and from 75 MPa at 28 days.
Price on request
REKS
REKS® Torkret — dry mix for shotcreting mine workings and concrete
Ready dry mix for dry shotcreting of mine workings, rock bases and damaged concrete, brick and stone; compression from 45 MPa at 28 days.
Price on request