REKS® Epolit — three-component epoxy grout for anchor pockets and equipment
Highly filled cold-curing epoxy for filling anchor pockets and grouting under turbines, compressors and pumps; 100 MPa in 7 days.

The ready-to-use dry mix REKS® Torkret is intended for the dry shotcreting method: it is used to line mine workings, stabilise rock bases and embankments, and quickly restore concrete surfaces in large volumes. The mix is also suitable for repairing reinforced concrete, brick and stone structures exposed to aggressive media in tunnels and industrial buildings. Compressive strength is at least 20 MPa after one day and 45 MPa after 28 days, freeze-thaw resistance F2 300, water impermeability W14; packed in 25 and 40 kg bags.
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | sprayed concrete mixes |
| Use | tunnels and metro, industrial buildings |
| Base | ready-to-use dry mix for the dry shotcreting method |
| Colour | grey |
| Packaging | bags 25 and 40 kg, MKR big bags |
| Application method | shotcreting of the lining structures of mine workings; rapid restoration of concrete surfaces in large volumes; application to rock bases and embankments for their stabilisation; repair of damaged surfaces of reinforced concrete, brick and stone structures exposed to aggressive media |
| Application temperature | +5…+30 °C |
| Curing | protection from precipitation for at least 24 h; in hot and windy weather — water spraying and covering with film |
| Key properties | freeze-thaw resistance: F2 300; water impermeability: W14; compressive strength at 28 days: ≥45 MPa; flexural strength at 1 day: ≥5 MPa; flexural strength at 28 days: ≥8 MPa; aggregate size: 2.5 mm; compressive strength at 1 day: ≥20 MPa |
| Shelf life | 9 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Highly filled cold-curing epoxy for filling anchor pockets and grouting under turbines, compressors and pumps; 100 MPa in 7 days.
High-strength three-component epoxy grout for bridge bearings, equipment and rails; 80 MPa after just one day in flowable consistency.
Non-shrink class R3 mortar for a smooth finish on new and repair of old concrete surfaces before protective coatings; aggregate size 0.315 mm.
Non-shrink R4 concrete mix supplied with crushed granite for repairing airfield and road pavements, industrial floors and bridge piers.
Thixotropic class R4 mortar for repairing bridges, tunnels and columns by spraying or trowel; each bag comes with a pail of fibre, flexure from 12 MPa.
Two-component epoxy adhesive-sealant for joints, cracks, minor concrete defects and fixing rebar and anchors; full readiness within 1 day.