BIRSS
BIRSS 59 S1 M1000 — non-shrink self-compacting concrete mix for grouting
Concrete mix with quartz and granite aggregates for grouting and anchoring equipment, repairing columns and joints; 100 MPa at 28 days.
Price on request
Cementitious grouts
A cementitious grout is a non-shrink mix of pourable consistency: once mixed with water, it flows under a base plate or into formwork and fills the gap without voids. Grout fixes equipment in its design position, fills joints of precast reinforced concrete solid and embeds anchors and rebar starters.
- general-purpose grouts for machine tools, presses, pumps, compressors and bearings of columns and bridges;
- high-strength products of 100–110 MPa, including grades for wind turbine towers, turbines and generators;
- steel-fibre mixes;
- ultra-rapid-hardening grouts for installation on tight schedules and winter grades that harden at temperatures as low as −25 °C;
- mixes for anchoring in small gaps, drill-hole and injection mortars, an expansive binder and a grout for the rail slab of ballastless track.
In your request, state the equipment type, the grout height, the nature of the loads and the temperature during installation.
Manufacturer
BIRSS
BIRSS 67 Shpurovaya — non-shrink injection compound for anchors and cracks
Flowable cementitious compound for crack injection, anchor fixing, grouting of bearings and soil stabilisation; water retention at least 98 %.
Price on request
Kalmatron
Gidrobeton KRIO-1 — grout for work at sub-zero temperatures
Rapid-hardening non-shrink mix for grouting columns, equipment and bridge bearings at air temperatures down to −10 °C.
Price on request
Kalmatron
Gidrobeton Nalivnoy-1 — pourable grout with fine crushed stone
Self-compacting cementitious mix for grouting equipment and steel structures, installing anchors and repair; 70 MPa compressive at 28 days.
Price on request
Kalmatron
Gidrobeton Nalivnoy-2 — fine-grained grout for precision grouting
Pourable fine-grained mix for grouting under equipment and steel structure supports, installing anchors and repair; bond 2.5 MPa.
Price on request
GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
High-strength non-shrink flowable R4 grout for anchors, equipment grouting and underwater concreting; 80 MPa at 28 days.
Price on request
GLIMS
GLIMS® PRO ANCHOR-T — R4 anchoring grout with aggregate up to 0.5 mm for small gaps
Thin-layer non-shrink flowable R4 grout for anchoring in small gaps and hard-to-reach places; aggregate up to 0.5 mm, 60 MPa.
Price on request
INDASTRO
Innolayn NC40 F — winter grout for work at −10…+10 °C
Cementitious grout for installing equipment, columns, joints and anchors at low temperatures; 10 MPa after 6 hours at −10 °C, 50 MPa at 28 days.
Price on request
INDASTRO
Innolayn NC40 RF3 — R4 grout for work at −25…−10 °C
Cementitious R4 grout for installing equipment, columns, joints and anchors at sub-zero temperatures; 15 MPa after 6 hours at −25 °C.
Price on request
INDASTRO
Innolayn NC60 — cementitious grout for high-precision equipment installation
Cementitious grout for installing presses, machine tools, pumps and compressors, grouting under columns and repair by pouring; 60 MPa at 28 days.
Price on request
INDASTRO
Innolayn NC60 SFiber — two-component grout with steel reinforcing fibre
Grout of cementitious mix and steel fibre for installing equipment, columns, bridges and airfields; flexural from 14 MPa, compressive from 60 MPa at 28 days.
Price on request
INDASTRO
Innolayn NC610 — high-strength cementitious grout with water impermeability W20
Cementitious grout for installing equipment, column bases, joints and anchors; 70 MPa in compression at 28 days, W20, workability from 45 minutes.
Price on request
INDASTRO
Innolayn NC620 R — ultra-rapid-hardening R4 grout for fast-track installation
Ultra-rapid-hardening R4 grout for equipment, anchors and sleepers in track concrete; 10 MPa in compression after just 2 hours.
Price on request
Pakol
Pakol Anker — B70 non-shrink grout for installing machine tools
High-strength flowable mix for grouting machine tools and equipment, installing anchors and filling joints in reinforced concrete; 80.0 MPa compressive after 28 days.
Price on request
Pakol
Pakol Anker S — B80 grout with steel and polymer fibre in the mix
Flowable cementitious grout for high-precision grouting of equipment, anchor starter bars and joints; fibre already in the mix, 100 MPa compressive after 28 days.
Price on request
REKS
REKS GRAUT GP (VSM) — grout under the rail slab of ballastless high-speed track
Low-viscosity R4 cementitious mix for filling the space under the rail slab of ballastless track, machine bases and bolts; 70 MPa at 28 days.
Price on request
REKS
REKS® Fluid — rapid-hardening flowable R4 grout for work down to −10 °C
Fibre-reinforced flowable mix for grouting under bridge bearings and equipment foundations and repairing roads and airfields; 50 MPa after one day.
Price on request
REKS
REKS® Graut 3.0 — rapid-setting fibre-reinforced mortar for chases and joints
Flowable fibre-reinforced R4 mix for fixing cables and pipes in chases and grouting joints and track concrete; 8 MPa compression after 1 hour.
Price on request
REKS
REKS® Graut GP — low-viscosity pourable grout, 75 MPa
Non-shrink low-viscosity R4 grout for machine bases and fixing beams, columns and bolts; from 35 MPa after one day and from 75 MPa at 28 days.
Price on request
REKS
REKS® Graut M — flowable non-shrink R4 grout for machine bases and anchors
Non-shrink highly flowable cementitious mix for grouting machine bases, fixing beams and columns and setting anchors; 60 MPa at 28 days.
Price on request
REKS
REKS® Grip Ultra — dispersed grout for sleepers, posts and rebar
Grout in 19 kg bags for fixing sleepers in track concrete, installing railings and posts and fixing rebar; 10 MPa after 2 hours.
Price on request
REKS
REKS® Litoy — pourable R4 grout for bridge bearings and equipment
Low-viscosity non-shrink cementitious mix for high-precision grouting under columns, bridge spans and equipment foundations; 80 MPa at 28 days.
Price on request
REKS
REKS® Litoy 110 — 110 MPa installation grout for wind turbine towers and equipment
High-strength rapid-hardening Portland cement grout with shrinkage compensators for wind turbines, bridges and equipment; 110 MPa at 28 days.
Price on request
REKS
REKS® StruktoLit — expanding cementitious binder for injection grouts and concrete
Highly flowable expanding binder for shrinkage-compensated mortars and concrete: repair of roads, airfields, bridges and masonry; 20 kg bag.
Price on request
No materials match these filters.