GLIMS
GLIMS® CF-40 — self-levelling cement floor
Non-shrink M250 cement self-levelling floor — a base for tiles, parquet, linoleum and epoxy or polyurethane coatings.
Price on request
GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
The high-strength non-shrink flowable mix GLIMS® PRO ANCHOR, class R4 to GOST R 56378, is used to install anchors, for high-precision installation and fixing of process equipment and for grouting under bearings. It is also used for monolithic joining of reinforced concrete elements, pouring heavily reinforced structures and underwater concreting, and contact with drinking water is permitted. After one day the mix reaches 40 MPa in compression, after 28 days 80 MPa, and with crushed stone added it yields concrete with strength up to 100 MPa; water impermeability W18, frost resistance F2 400.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | cementitious grouts |
| Use | equipment foundations, anchoring of rebar and bolts, columns and beams, tanks and treatment plants |
| Base | High-strength non-shrink flowable mix based on special cements, graded sand, mineral fillers and chemical admixtures |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | Installation of anchors, high-precision installation and fixing of process equipment (grouting under equipment and bearings), monolithic joining of reinforced concrete structural elements, pouring of heavily reinforced structures, underwater concreting; contact with drinking water is permitted |
| Key properties | maximum aggregate size: 3 mm; mixing water: 0.12–0.14 l per 1 kg; pot life: 30 min; adhesion: ≥2.0 MPa; modulus of elasticity: ≥20,000 MPa; compressive strength at 1 / 28 days: ≥40 / ≥80 MPa; flexural strength: ≥10 MPa; frost resistance: F2 400; water impermeability: W18; with crushed stone added — concrete up to 100 MPa |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | class R4 to GOST R 56378; TU 5745-010-40397319-2003 No. 0440/14 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO CRT-40 — thixotropic R3 mortar for local structural repair
Thixotropic R3 mortar for repairing concrete of B20 and above on walls and ceilings without formwork: bridges, tunnels, car parks; 40 MPa at 28 days.
Price on request
GLIMS
GLIMS® PRO CRT-60 — thixotropic R4 mortar for structures under increased loads
Thixotropic R4 repair mortar for bridges, tunnels, cooling towers and flue ducts under static and dynamic loads; 60 MPa, W18.
Price on request
GLIMS
GLIMS® PRO Protection — anti-corrosion rebar protection and bonding primer
Elastic cement-polymer mix with corrosion inhibitors for protecting steel reinforcement and forming a bond coat before repair; 4 kg pail.
Price on request
GLIMS
GLIMS® PRO Cure-A — curing impregnation for concrete
Waterborne acrylate curing impregnation: retains moisture in fresh concrete, dustproofs and hardens finished floors.
Price on request
GLIMS
GLIMS® PRO CRF-60 — flowable R4 mortar for damp and aggressive conditions
Fibre-reinforced flowable R4 mortar for repairing concrete under high humidity, loads and in aggressive environments; 60 MPa, W18, F2 400.
Price on request