GLIMS
GLIMS® PRO CRF-40 Rapid — rapid-hardening flowable R4 mortar for urgent repair
Rapid-hardening flowable R4 mortar for fast-track repair of bridges, tunnels and industrial floors, including at −10 °C; 10 MPa after 2 hours.
Price on request
GLIMS
GLIMS® PRO Protection — anti-corrosion rebar protection and bonding primer
Steel reinforcement and embedded parts are protected against corrosion by GLIMS® PRO Protection, a one-component elastic cement-polymer mix with corrosion inhibitors. The same material serves as a bonding primer: before cementitious repair mortars are placed it forms a bond coat on steel and concrete. Adhesion to steel is at least 1.0 MPa, to concrete from 1.5 MPa, pot life 60 minutes, frost resistance of the contact zone Fkz 75; supplied in 4 kg pails.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | rebar protection and bonding compounds |
| Use | columns and beams, tanks and treatment plants |
| Base | One-component elastic cement-polymer mix with corrosion inhibitors |
| Colour | grey |
| Packaging | pail 4 kg |
| Application method | Corrosion protection of steel reinforcement and embedded parts; bonding primer (bond coat) on steel and concrete before placing cementitious repair mortars |
| Application temperature | +5…+35 °C |
| Key properties | mixing water: 0.23–0.25 l per 1 kg; pot life: 60 min; adhesion to steel: ≥1.0 MPa; to concrete: ≥1.5 MPa; water impermeability: W2; frost resistance of the contact zone: Fkz 75 |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | TU 5745-010-40397319-2003 No. 0430/5 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO CRP-40 0.5 — finishing thixotropic R3 mortar for restoring geometry
Non-shrink finishing R3 mortar for finishing concrete and stone surfaces and repairing dormant cracks; contact with drinking water is permitted.
Price on request
GLIMS
GLIMS® PRO CRT-60 — thixotropic R4 mortar for structures under increased loads
Thixotropic R4 repair mortar for bridges, tunnels, cooling towers and flue ducts under static and dynamic loads; 60 MPa, W18.
Price on request
GLIMS
GLIMS® PRO CRT-20 — thixotropic R2 mortar for non-structural repair
Thixotropic R2 mortar with fibre for filling voids, caulking joints, repairing manholes and tanks; compressive strength from 20 MPa at 28 days, W8.
Price on request
GLIMS
GLIMS® PRO FS TOP 100 — quartz topping for concrete floors
Quartz hardening topping for floors under moderate and significant loads: warehouses, car parks, car service stations, production halls and retail areas.
Price on request
GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
High-strength non-shrink flowable R4 grout for anchors, equipment grouting and underwater concreting; 80 MPa at 28 days.
Price on request