GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
High-strength non-shrink flowable R4 grout for anchors, equipment grouting and underwater concreting; 80 MPa at 28 days.
Price on request
GLIMS
GLIMS® PRO CRF-40 Rapid — rapid-hardening flowable R4 mortar for urgent repair
The rapid-hardening flowable mix GLIMS® PRO CRF-40 Rapid, class R4 to GOST R 56378, is intended for structural repair of concrete and reinforced concrete within tight deadlines, including at sub-zero temperatures: it is used from −10 to +35 °C. After 2 hours compressive strength reaches 10 MPa, after 28 days 45 MPa. The mix is used on bridges, bridge spans, in tunnels, on car parks, viaducts, industrial floors and equipment foundations, and for monolithic joining; pot life is 20 minutes at −10…+10 °C and 15 minutes at +10…+35 °C.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | flowable repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, floors, equipment foundations |
| Base | Rapid-hardening flowable repair mix based on special cements, graded sand, mineral fillers and chemical admixtures |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | monolithic joining; port and hydraulic structures |
| Application temperature | −10…+35 °C |
| Key properties | mixing water: 0.14–0.15 l per 1 kg; pot life: 20 min at −10…+10 °C, 15 min at +10…+35 °C; adhesion: 2 MPa; compressive strength at 2 h / 28 days: ≥10 / ≥45 MPa; flexural strength: ≥6 MPa; frost resistance: F2 300; water impermeability: W12 |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | class R4 to GOST R 56378; TU 5745-010-40397319-2003 No. 0500/5 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO FS Screed 1K — high-strength cement floor screed
High-strength M400 cement screed for production halls, warehouses, car parks and car service stations, including unheated ones; walkable after 24 h.
Price on request
GLIMS
GLIMS® PRO Protection — anti-corrosion rebar protection and bonding primer
Elastic cement-polymer mix with corrosion inhibitors for protecting steel reinforcement and forming a bond coat before repair; 4 kg pail.
Price on request
GLIMS
GLIMS® PRO FS TOP 100 — quartz topping for concrete floors
Quartz hardening topping for floors under moderate and significant loads: warehouses, car parks, car service stations, production halls and retail areas.
Price on request
GLIMS
GLIMS® PRO CRF-40 — flowable R3 repair mortar for pouring and placing in formwork
Non-shrink flowable R3 mortar with fibre for strengthening horizontal bases and filling voids under foundations; 40 MPa, W14.
Price on request
GLIMS
GLIMS® PRO CRT-20 — thixotropic R2 mortar for non-structural repair
Thixotropic R2 mortar with fibre for filling voids, caulking joints, repairing manholes and tanks; compressive strength from 20 MPa at 28 days, W8.
Price on request