GLIMS
GLIMS® PRO CRF-40 — flowable R3 repair mortar for pouring and placing in formwork
Non-shrink flowable R3 mortar with fibre for strengthening horizontal bases and filling voids under foundations; 40 MPa, W14.
Price on request
GLIMS
GLIMS® PRO FS TOP 100 — quartz topping for concrete floors
This cement-bound topping with quartz filler is designed for floors under moderate and significant mechanical, impact and abrasive loads — warehouses, car parks, workshops, production halls. For light and medium loads the base concrete must be at least B22.5, for heavy loads B25 and above; the mix is trowelled in with power trowels in two passes. Compressive strength after 28 days is at least 55 MPa, abrasion 0.6 g/cm², service at −50…+120 °C.
Specifications
| Manufacturer | GLIMS — AO “GLIMS-Production”, Podolsk |
|---|---|
| Type | toppings |
| Use | warehouses and logistics, car parks and ramps, production halls, retail and public, outdoor areas |
| Base | dry mix: cement binder, mineral (quartz) filler, modifying additives |
| Colour | grey; RAL tinting in dark shades |
| Packaging | kraft paper bags 25 kg |
| Application method | trowelled into freshly laid concrete (light and medium loads — at least B22.5; heavy — B25 and above) with power trowels in two passes (2/3 + 1/3), with GLIMS Cure-A curing compound up to 0.2 l/m² where necessary; joint cutting after 2–3 days, bays not larger than 6×6 m |
| Application temperature | +5…+35 °C |
| Curing | cutting of movement joints 2–3 days after trowelling |
| Key properties | 28-day compressive strength at least 55 MPa; abrasion (GOST 13087) 0.6 g/cm²; maximum filler fraction 2 mm; service temperature −50…+120 °C |
| Consumption | 4–6 kg/m² |
| Shelf life | 12 months from the date of manufacture in undamaged packaging in a dry room |
| Standards | abrasion to GOST 13087 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO CRT-60 — thixotropic R4 mortar for structures under increased loads
Thixotropic R4 repair mortar for bridges, tunnels, cooling towers and flue ducts under static and dynamic loads; 60 MPa, W18.
Price on request
GLIMS
GLIMS® PRO CRF-60 — flowable R4 mortar for damp and aggressive conditions
Fibre-reinforced flowable R4 mortar for repairing concrete under high humidity, loads and in aggressive environments; 60 MPa, W18, F2 400.
Price on request
GLIMS
GLIMS® PRO CRP-40 0.5 — finishing thixotropic R3 mortar for restoring geometry
Non-shrink finishing R3 mortar for finishing concrete and stone surfaces and repairing dormant cracks; contact with drinking water is permitted.
Price on request
GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
High-strength non-shrink flowable R4 grout for anchors, equipment grouting and underwater concreting; 80 MPa at 28 days.
Price on request
GLIMS
GLIMS® PRO FS Screed 1K — high-strength cement floor screed
High-strength M400 cement screed for production halls, warehouses, car parks and car service stations, including unheated ones; walkable after 24 h.
Price on request