GLIMS
GLIMS® PRO CRF-40 — flowable R3 repair mortar for pouring and placing in formwork
Non-shrink flowable R3 mortar with fibre for strengthening horizontal bases and filling voids under foundations; 40 MPa, W14.
Price on request
GLIMS
GLIMS® PRO CRT-60 — thixotropic R4 mortar for structures under increased loads
Increased static and dynamic loads are the field of application of GLIMS® PRO CRT-60, a mortar of class R4 to GOST R 56378. It is used without formwork on elements of bridges, tunnels, car parks, viaducts, industrial floors and equipment foundations, for rigid connection of precast structures, in port and hydraulic structures, cooling towers and flue ducts. After one day the mix reaches 25 MPa in compression, after 28 days 60 MPa, modulus of elasticity from 20,000 MPa, water impermeability W18, frost resistance F2 400.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, industrial buildings, equipment foundations |
| Base | Non-shrink thixotropic mix of special cements, graded sand, mineral aggregates and chemical admixtures, with polymer fibre |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | Structural repair of concrete and reinforced concrete under increased static and dynamic loads without formwork: elements of bridges, tunnels, car parks, viaducts, industrial floors, equipment foundations; rigid connection of precast structures; port and hydraulic structures; cooling towers and flue ducts |
| Application temperature | +5…+35 °C |
| Key properties | maximum aggregate size: 3 mm; mixing water: 0.15–0.16 l per 1 kg; pot life: 30 min; adhesion: ≥2 MPa; modulus of elasticity: ≥20,000 MPa; compressive strength at 1 / 28 days: ≥25 / ≥60 MPa; flexural strength: ≥10 MPa; frost resistance: F2 400; water impermeability: W18 |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | class R4 to GOST R 56378; TU 5745-010-40397319-2003 No. 0500/3 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® CRT-40 AF — winter thixotropic R3 mortar for repair at −15…+15 °C
Coarse-grained thixotropic R3 mortar for repairing concrete, steps and stair flights at temperatures from −15 to +15 °C; W12, F2 300.
Price on request
GLIMS
GLIMS® CF-40 — self-levelling cement floor
Non-shrink M250 cement self-levelling floor — a base for tiles, parquet, linoleum and epoxy or polyurethane coatings.
Price on request
GLIMS
GLIMS® PRO FS Screed 1K — high-strength cement floor screed
High-strength M400 cement screed for production halls, warehouses, car parks and car service stations, including unheated ones; walkable after 24 h.
Price on request
GLIMS
GLIMS® PRO CRT-20 — thixotropic R2 mortar for non-structural repair
Thixotropic R2 mortar with fibre for filling voids, caulking joints, repairing manholes and tanks; compressive strength from 20 MPa at 28 days, W8.
Price on request
GLIMS
GLIMS® PRO CRP-40 0.5 — finishing thixotropic R3 mortar for restoring geometry
Non-shrink finishing R3 mortar for finishing concrete and stone surfaces and repairing dormant cracks; contact with drinking water is permitted.
Price on request