GLIMS
GLIMS® PRO Protection — anti-corrosion rebar protection and bonding primer
Elastic cement-polymer mix with corrosion inhibitors for protecting steel reinforcement and forming a bond coat before repair; 4 kg pail.
Price on request
GLIMS
GLIMS® PRO CRF-40 — flowable R3 repair mortar for pouring and placing in formwork
The non-shrink flowable mix GLIMS® PRO CRF-40, class R3 to GOST R 56378-2015, is made on the basis of special cements and reinforced with polymer fibre. It is poured or placed in formwork to strengthen horizontal bases, fill voids under foundations, and repair elements of bridges, tunnels, car parks, industrial floors and equipment foundations, port and hydraulic structures. Compressive strength is 15 MPa after one day and 40 MPa after 28 days, flexural from 8 MPa, water impermeability W14.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | flowable repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, floors, equipment foundations |
| Base | Non-shrink flowable mix based on special cements, graded sand, mineral fillers and chemical admixtures, with polymer fibre |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | Structural repair of concrete and reinforced concrete by pouring or placing in formwork: strengthening horizontal bases, filling voids under foundations, repairing elements of bridges, tunnels, car parks, industrial floors, equipment foundations; port and hydraulic structures |
| Application temperature | +5…+35 °C |
| Key properties | mixing water: 0.12–0.14 l per 1 kg; pot life: 30 min; adhesion: ≥1.5 MPa; modulus of elasticity: ≥15,000 MPa; compressive strength at 1 / 28 days: ≥15 / ≥40 MPa; flexural strength: ≥8 MPa; frost resistance: F2 300; water impermeability: W14 |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | class R3 to GOST R 56378-2015; TU 5745-010-40397319-2003 No. 0500/4 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO FS TOP 100 — quartz topping for concrete floors
Quartz hardening topping for floors under moderate and significant loads: warehouses, car parks, car service stations, production halls and retail areas.
Price on request
GLIMS
GLIMS® PRO FS TOP 450 — corundum topping for industrial floors
Dry corundum hardening mix for concrete floors under extreme mechanical, impact and abrasive loads; up to +120 °C.
Price on request
GLIMS
GLIMS® PRO ANCHOR-T — R4 anchoring grout with aggregate up to 0.5 mm for small gaps
Thin-layer non-shrink flowable R4 grout for anchoring in small gaps and hard-to-reach places; aggregate up to 0.5 mm, 60 MPa.
Price on request
GLIMS
GLIMS® PRO CRF-40 Rapid — rapid-hardening flowable R4 mortar for urgent repair
Rapid-hardening flowable R4 mortar for fast-track repair of bridges, tunnels and industrial floors, including at −10 °C; 10 MPa after 2 hours.
Price on request
GLIMS
GLIMS® CF-40 — self-levelling cement floor
Non-shrink M250 cement self-levelling floor — a base for tiles, parquet, linoleum and epoxy or polyurethane coatings.
Price on request