GLIMS
GLIMS® PRO CRF-40 — flowable R3 repair mortar for pouring and placing in formwork
Non-shrink flowable R3 mortar with fibre for strengthening horizontal bases and filling voids under foundations; 40 MPa, W14.
Price on request
GLIMS
GLIMS® PRO FS TOP 450 — corundum topping for industrial floors
TOP 450 is a corundum topping for the heaviest duty: open and closed warehouses, car parks, workshops, car service stations, production halls and retail areas. The cement-bound mix is trowelled into freshly laid concrete with power trowels, together with GLIMS Cure-A curing compound where necessary. Compressive strength after 28 days is at least 60 MPa, abrasion to GOST 13087 is 0.5 g/cm², service range −50…+120 °C.
Specifications
| Manufacturer | GLIMS — AO “GLIMS-Production”, Podolsk |
|---|---|
| Type | toppings |
| Use | warehouses and logistics, car parks and ramps, production halls, retail and public, outdoor areas |
| Base | cement-bound dry mix with corundum filler |
| Colour | grey / dark grey; RAL tinting in dark shades |
| Packaging | kraft paper bags 25 kg |
| Application method | trowelled into freshly laid concrete (for heavy loads — class B25 and above) with power trowels in two passes (2/3 + 1/3), with GLIMS Cure-A curing compound up to 0.2 l/m² where necessary; joint cutting after 2–3 days, bays not larger than 6×6 m |
| Application temperature | +5…+35 °C |
| Curing | cutting of movement joints 2–3 days after trowelling |
| Key properties | 28-day compressive strength at least 60 MPa; abrasion (GOST 13087) 0.5 g/cm²; maximum filler fraction 2 mm; service temperature −50…+120 °C; “extremely high abrasion resistance” |
| Consumption | 4–6 kg/m² |
| Shelf life | 12 months from the date of manufacture in undamaged packaging in a dry room |
| Standards | abrasion to GOST 13087 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
High-strength non-shrink flowable R4 grout for anchors, equipment grouting and underwater concreting; 80 MPa at 28 days.
Price on request
GLIMS
GLIMS® CF-40 — self-levelling cement floor
Non-shrink M250 cement self-levelling floor — a base for tiles, parquet, linoleum and epoxy or polyurethane coatings.
Price on request
GLIMS
GLIMS® PRO CRP-40 0.5 — finishing thixotropic R3 mortar for restoring geometry
Non-shrink finishing R3 mortar for finishing concrete and stone surfaces and repairing dormant cracks; contact with drinking water is permitted.
Price on request
GLIMS
GLIMS® PRO CRF-60 — flowable R4 mortar for damp and aggressive conditions
Fibre-reinforced flowable R4 mortar for repairing concrete under high humidity, loads and in aggressive environments; 60 MPa, W18, F2 400.
Price on request
GLIMS
GLIMS® PRO FS TOP 100 — quartz topping for concrete floors
Quartz hardening topping for floors under moderate and significant loads: warehouses, car parks, car service stations, production halls and retail areas.
Price on request