GLIMS
GLIMS® PRO FS TOP 450 — corundum topping for industrial floors
Dry corundum hardening mix for concrete floors under extreme mechanical, impact and abrasive loads; up to +120 °C.
Price on request
GLIMS
GLIMS® PRO ANCHOR-T — R4 anchoring grout with aggregate up to 0.5 mm for small gaps
GLIMS® PRO ANCHOR-T, the thin-layer version of the anchoring mix, is designed for high-precision anchoring in small gaps and hard-to-reach places. Its maximum aggregate size is 0.5 mm, pot life 40 minutes; the mix is used to install and fix process equipment and building structures, for monolithic grouting of anchor connections and for underwater concreting. Class R4 to GOST R 56378-2015, compressive strength 30 MPa after one day and 60 MPa after 28 days, flexural from 10 MPa, water impermeability W16.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | cementitious grouts |
| Use | equipment foundations, anchoring of rebar and bolts |
| Base | High-strength thin-layer non-shrink flowable mix based on special cements, graded sand, mineral fillers and chemical admixtures |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | Installation and fixing of process equipment and building structures, high-precision anchoring in small gaps and hard-to-reach places, monolithic grouting of anchor connections 3–100 mm, underwater concreting |
| Key properties | maximum aggregate size: 0.5 mm; mixing water: 0.16–0.18 l per 1 kg; pot life: 40 min; adhesion: ≥2.0 MPa; modulus of elasticity: ≥20,000 MPa; compressive strength at 1 / 28 days: ≥30 / ≥60 MPa; flexural strength: ≥10 MPa; frost resistance: F2 300; water impermeability: W16 |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | class R4 to GOST R 56378-2015; TU 5745-010-40397319-2003 No. 0440/14 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® CF-40 — self-levelling cement floor
Non-shrink M250 cement self-levelling floor — a base for tiles, parquet, linoleum and epoxy or polyurethane coatings.
Price on request
GLIMS
GLIMS® PRO CRT-20 — thixotropic R2 mortar for non-structural repair
Thixotropic R2 mortar with fibre for filling voids, caulking joints, repairing manholes and tanks; compressive strength from 20 MPa at 28 days, W8.
Price on request
GLIMS
GLIMS® PRO FS Screed 1K — high-strength cement floor screed
High-strength M400 cement screed for production halls, warehouses, car parks and car service stations, including unheated ones; walkable after 24 h.
Price on request
GLIMS
GLIMS® PRO CRF-40 Rapid — rapid-hardening flowable R4 mortar for urgent repair
Rapid-hardening flowable R4 mortar for fast-track repair of bridges, tunnels and industrial floors, including at −10 °C; 10 MPa after 2 hours.
Price on request
GLIMS
GLIMS® PRO CRT-40 — thixotropic R3 mortar for local structural repair
Thixotropic R3 mortar for repairing concrete of B20 and above on walls and ceilings without formwork: bridges, tunnels, car parks; 40 MPa at 28 days.
Price on request