Innolayn NC60 is a cementitious grout for high-precision installation of industrial equipment: presses, machine tools, generators, pumps, compressors, lifting and handling equipment and diesel engines. It is also used for grouting under column bases and for repairing heavily reinforced and bridge structures by pouring. Effective contact area at least 85 %, compressive strength from 30 MPa after 24 hours and from 60 MPa after 28 days, sulphate resistance coefficient 0.9, grades W16 and F2 300.
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | cementitious grouts |
| Use | equipment foundations, anchoring of rebar and bolts, columns and beams, bridges and overpasses, roads and airfields |
| Base | Portland cement, mineral filler, modifying admixtures |
| Packaging | bags 25 kg |
| Application method | Innolayn NC60 grout is used for high-precision installation of industrial equipment, grouting under column bases, and repair and restoration of concrete and reinforced concrete by pouring: Presses, machine tools; Generators, pumps, compressors; Lifting and handling equipment; Diesel engines; Heavily reinforced surfaces where hand application is impossible; Bridge structures; … |
| Application temperature | +5…+35 °C |
| Curing | protection against moisture loss for at least 24 h (water spraying or wet hessian) |
| Key properties | mixing water: 3.0-3.25; maximum aggregate size, mm: 3; workability (cone spread): 280 – 350 mm; workability retention: 30 min; effective contact area: ≥85 %; flexural strength at 24 h: ≥4 MPa; flexural strength at 28 days: ≥8 MPa; compressive strength at 24 h: ≥30 MPa; compressive strength at 28 days: ≥60 MPa; bond strength to substrate: ≥2 MPa; linear expansion/shrinkage: ≤0.8 mm/m; service in aggressive environments: 5< pH <14; frost resistance: F1 1000; frost resistance (road and airfield concrete, mineralised medium): F2 300; water impermeability: W16; sulphate resistance coefficient (365 days): 0.9; service temperature: -60…+80 °C |
| Shelf life | 12 months in paper packaging, 24 months in plastic packaging from the date of manufacture, in a dry room |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-shrink flowable R4 mortar with fibre for heavily reinforced areas, bridges, roads, airfields and joints; 60 MPa at 28 days, work from −10 °C.
Grout of cementitious mix and steel fibre for installing equipment, columns, bridges and airfields; flexural from 14 MPa, compressive from 60 MPa at 28 days.
Fibre-reinforced finishing mortar for fine finishing of concrete structures in winter at temperatures from −10 to +10 °C; compressive strength 40 MPa at 28 days.
Two-component epoxy coating protecting concrete of treatment plants and sewers against sulphuric acid and hydrogen sulphide; contact with drinking water is permitted.
Elastic polyurethane self-levelling floor for workshops, warehouses, offices and schools; elongation at break from 40%, service from −60 to +80 °C.
Epoxy self-levelling floor with 100% solids for workshops, warehouses, car parks, food and pharmaceutical plants; Shore D hardness from 85.
