LEVELINE FE871 AS — two-component epoxy antistatic self-levelling floor
Epoxy antistatic self-levelling floor for electronics, cleanrooms, data centres and medicine; resistance 10⁶–10⁸ Ω.

Khimskrin SE 2k, based on an epoxy binder, protects reinforced concrete elements of water treatment plants and sewer networks against sulphuric acid, hydrogen sulphide, oxides of nitrogen, sulphur and carbon and wastewater, and, over a primer, metal surfaces as well. The coating withstands one month of continuous exposure to sulphuric acid at concentrations of 10, 50 and 80 % at 20 and 40 °C, nitric acid 20 %, potassium hydroxide 20 %, ammonia 25 %, petroleum products and oils. The components are mixed in a ratio of 5:2, pot life is 120 minutes; contact with drinking water and application on a damp substrate are permitted.
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | other concrete repair materials |
| Use | tanks and treatment plants |
| Base | Two-component protective compound with an epoxy binder |
| Packaging | 28 kg kit: component A 20 kg (iron pail), component B 8 kg (plastic can) |
| Application method | Protection of reinforced concrete elements of water treatment plants and sewer networks against sulphuric acid, hydrogen sulphide, oxides of nitrogen, sulphur and carbon, and wastewater; protection of metal surfaces (over primer) |
| Application temperature | +5…+30 °C |
| Key properties | base: epoxy binder, 2 components, ratio A:B by weight 5:2; density: 1.55 g/cm³; pot life: 120 min; second coat: after 6–24 h; contact with drinking water and application on a damp substrate are permitted; resistance (1 month of continuous exposure): sulphuric acid 10 / 50 / 80 % at 20 and 40 °C, acetic and formic acid 5 %, nitric acid 20 %, potassium hydroxide 20 %, ammonia 25 %, petroleum products, oils; hydrochloric acid 37 % — up to 7 days |
| Shelf life | 12 months in a dry place in the original packaging at +5…+30 °C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Epoxy antistatic self-levelling floor for electronics, cleanrooms, data centres and medicine; resistance 10⁶–10⁸ Ω.
Two-component low-viscosity epoxy resin for elastic bonding of structures with crack widths of 0.3–5 mm; elongation at break 30 %.
Dry quartz mix for hardening freshly laid concrete in workshops, warehouses and car parks; compressive strength from 70 MPa at 28 days.
Thixotropic R3 cementitious mortar for structural repair of concrete and reinforced concrete in industrial buildings; compressive strength at 28 days from 35 MPa.
Thixotropic R4 repair mortar for high-strength concrete structures; at least 30 MPa after 24 hours and from 60 MPa after 28 days.
Cementitious grout for installing equipment, column bases, joints and anchors; 70 MPa in compression at 28 days, W20, workability from 45 minutes.