LEVELINE FC70 S is a dry hardening mix based on Portland cement with a quartz aggregate, worked into freshly laid concrete with power trowels. It is suitable for floors in production workshops, warehouses, car parks, ramps and outdoor areas with moderate abrasion and impact loads. At 28 days its compressive strength is at least 70 MPa, abrasion is no more than 0.25 g/cm², and the service temperature range is −40 to +60 °C. The topping is not intended for acids and salts.
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, outdoor areas |
| Base | Portland cement, quartz aggregate |
| Packaging | 25 kg bag |
| Application method | dry application onto freshly laid concrete (~2/3, then ~1/3 of the consumption) with floating by power trowels with a disc, then finishing with blades; curing — LEVELINE SP2 compound |
| Application temperature | substrate and air above +10 °C; not recommended above +30 °C and/or at humidity below 60% |
| Key properties | Compressive strength at 28 days at least 70 MPa; abrasion no more than 0.25 g/cm2; max. aggregate size 2.5 mm; service temperature -40…+60 °C; intensity of mechanical impact (SNiP 2.03.13) — significant; exposure to liquids — high |
| Consumption | 4 - 6 kg/m2 |
| Shelf life | 12 months from the date of manufacture (dry room, original factory packaging) |
| Standards | manufacturer's TU; impact intensity per SNiP 2.03.13 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based polyurethane-acrylic curing compound for fresh concrete and toppings in workshops, warehouses and outdoor areas; dries in up to 3 hours at +20 °C.
Cement self-levelling floor for workshops, warehouses and public buildings, and a base for polymer coatings; walkable after 3 hours.
Ultra-rapid-hardening R4 grout for equipment, anchors and sleepers in track concrete; 10 MPa in compression after just 2 hours.
Graded sand with 0.1–0.4 mm particles for filling epoxy and polyurethane compounds and creating an anti-slip surface.
Acrylic primer with antiseptic for concrete before self-levelling floors, screeds and toppings indoors; tack-free in 60 minutes.
Clear polyurethane sealer for curing freshly laid concrete and toppings in workshops and warehouses; dries in 2 hours at +20 °C.
