LEVELINE FC830 is a self-levelling mix based on special cements that works both as a finishing coat and as a flat base for polymer floors. It is poured by pump or by hand, can be walked on after just 3 hours, and the floor takes full load after 7 days. Abrasion class AR0.5, compressive strength at 28 days at least 35 MPa, flexural strength at least 8 MPa, water impermeability W20. Suitable for workshops, warehouses, retail and public premises.
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | floor material |
| Use | production workshops, warehouses and logistics, retail and public |
| Base | special cements, mineral filler, modifying additives |
| Packaging | 20 kg bags, 60 per pallet 1200×800 |
| Application method | self-levelling cement finishing floor: by pump or by hand, gauge rake + spiked roller; strips up to 6-8 m with machine application; base for polymer coatings |
| Application temperature | +5…+30 °C (+17…+23 °C recommended) |
| Curing | foot traffic 3 hours; partial load after 1 day; full load after 7 days; acrylic varnish after 1 day; polymer floors after 3-7 days (at substrate moisture no more than 4%) |
| Key properties | Abrasion EN 13892-4 (BCA) AR0.5; compressive strength at 24 h at least 15 MPa, at 28 days at least 35 MPa; flexural strength at 28 days at least 8 MPa; bond at least 2 MPa; shrinkage no more than 0.5 mm/m; W20; F1300; aggregate size no more than 0.5 mm; service temperature -50…+70 °C |
| Layer thickness | permissible 3-40 mm; recommended 5-20 mm |
| Consumption | 1.8-1.9 kg/m2 at a 1 mm layer |
| Shelf life | 6 months |
| Standards | manufacturer's TU; EN 13892-4 (BCA) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Dry mix for hardening concrete floors that does not spark on impact, for workshops and warehouses with explosion-safety requirements; from 70 MPa.
Thixotropic R4 repair mortar for high-strength concrete structures; at least 30 MPa after 24 hours and from 60 MPa after 28 days.
Cementitious compound for protecting reinforcement against corrosion and forming a bonding layer in concrete repair; bond to the substrate from 2.0 MPa.
Cementitious grout for installing equipment, columns, joints and anchors at low temperatures; 10 MPa after 6 hours at −10 °C, 50 MPa at 28 days.
Moisture-curing polyurethane primer for polymer floors and stand-alone impregnation of concrete in workshops and warehouses; fire hazard class KM1.
Cementitious grout for installing presses, machine tools, pumps and compressors, grouting under columns and repair by pouring; 60 MPa at 28 days.
