INDASTRO
Innolayn NC40 RF3 — R4 grout for work at −25…−10 °C
Cementitious R4 grout for installing equipment, columns, joints and anchors at sub-zero temperatures; 15 MPa after 6 hours at −25 °C.
Price on request
INDASTRO
Profskrin LC2.5 — anti-corrosion compound for rebar and bonding layer
The anti-corrosion Profskrin LC2.5 performs two tasks: it protects reinforcement against corrosion and creates a bonding layer on the substrate. The grey compound, based on Portland cement with mineral filler and 0.63 mm aggregate, provides bond to the substrate of at least 2.0 MPa and flexural strength from 8 MPa at 28 days. Until it hardens it is protected from water; the material works at pH from 5 to 14 and temperatures from −60 to +80 °C.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus, Kolomna |
|---|---|
| Type | rebar protection and bonding compounds |
| Use | industrial buildings, columns and beams |
| Base | Portland cement, mineral filler, modifying admixtures |
| Colour | grey |
| Packaging | paper bags 25 kg (Kolomna production unit) |
| Application method | Profskrin LC 2.5 anti-corrosion compound is designed to protect reinforcement against corrosion and to create a bonding layer. |
| Application temperature | +5…+30 °C |
| Curing | protect from water until hardened |
| Key properties | mixing water: 0.25-0.28; maximum aggregate size, mm: 0.63; bond strength to substrate: ≥2.0 MPa; flexural strength at 28 days: ≥8 MPa; service in aggressive environments: 5< pH <14; Fresh mortar density, kg/m³: 1,800; workability retention: ≥30 min; service temperature: -60…+80 °C |
| Shelf life | 12 months in paper packaging from the date of manufacture, in a dry room |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
LEVELINE FC806 non-sparking screed — base for an explosion-proof floor
Non-combustible non-sparking screed for levelling substrates in workshops and warehouses with explosion-safety requirements; walkable after about 12 hours.
Price on request
INDASTRO
Innolayn NC60 — cementitious grout for high-precision equipment installation
Cementitious grout for installing presses, machine tools, pumps and compressors, grouting under columns and repair by pouring; 60 MPa at 28 days.
Price on request
INDASTRO
Profskrin RC50 RTi — ultra-rapid-hardening thixotropic R4 mortar with fibre
Non-shrink thixotropic R4 mortar to EN 1504 with polymer fibre: 20 MPa in compression after 2 hours, work at temperatures from −10 to +35 °C.
Price on request
INDASTRO
LEVELINE FP840 one-component polyurethane primer — hardening impregnation for concrete
Moisture-curing polyurethane primer for polymer floors and stand-alone impregnation of concrete in workshops and warehouses; fire hazard class KM1.
Price on request
INDASTRO
LEVELINE FC807 non-sparking dry-shake topping — for explosion and fire hazard sites
Dry mix for hardening concrete floors that does not spark on impact, for workshops and warehouses with explosion-safety requirements; from 70 MPa.
Price on request