INDASTRO
LEVELINE FC801 Cr corundum dry-shake topping — hardening industrial floors
Corundum dry mix for workshop and warehouse floors with medium and increased loads; abrasion class AR0.5 to EN 13892-4.
Price on request
INDASTRO
Profskrin RC50 RTi — ultra-rapid-hardening thixotropic R4 mortar with fibre
Profskrin RC50 RTi is an ultra-rapid-hardening non-shrink thixotropic mix with polymer fibre, class R4 to EN 1504. Already after 2 hours it reaches at least 20 MPa in compression and 4 MPa in flexure, after 24 hours 25 MPa, after 28 days 50 MPa. It can be worked at temperatures from −10 to +35 °C, and its field of application covers load-bearing and bridge structures, treatment, industrial and underground engineering facilities; workability is retained for 10–15 minutes.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tanks and treatment plants, industrial buildings, columns and beams |
| Base | Ultra-rapid-hardening non-shrink thixotropic-type dry mix with polymer fibre |
| Packaging | bags 25 kg |
| Application method | Profskrin RC50 RTi repair mortar is used for structural repair of concrete structures: Load-bearing building structures; Bridge structures; Treatment facilities; Underground engineering structures; Industrial structures |
| Application temperature | −10…+35 °C |
| Key properties | mixing water: 0.14-0.15; compressive strength at 2 h: ≥20 MPa; compressive strength at 24 h: ≥25 MPa; compressive strength at 28 days: ≥50 MPa; flexural strength at 2 h: ≥4 MPa; flexural strength at 24 h: ≥5 MPa; flexural strength at 28 days: ≥8 MPa; bond strength to substrate: ≥2 MPa; workability retention: 10-15 min; frost resistance: ≥300 cycles; Mortar density, kg/m³: 2,100; maximum aggregate size, mm: 2.5 |
| Shelf life | 12 months in the original factory packaging from the date of manufacture, in a dry room |
| Standards | class R4 to EN 1504 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
LEVELINE FE871 AS — two-component epoxy antistatic self-levelling floor
Epoxy antistatic self-levelling floor for electronics, cleanrooms, data centres and medicine; resistance 10⁶–10⁸ Ω.
Price on request
INDASTRO
LEVELINE FE850 two-component epoxy primer — for polymer floors
Solvent-free epoxy primer for self-levelling and decorative polymer floors, also a stand-alone impregnation; adhesion to concrete from 2.5 MPa.
Price on request
INDASTRO
Profskrin RC80 — thixotropic R4 mortar for concrete of class B60 and above
Thixotropic R4 repair mortar for structures made of B60 concrete and above; compressive strength at 28 days at least 80 MPa, flexural strength 10 MPa.
Price on request
INDASTRO
Innolayn NC40 RF3 — R4 grout for work at −25…−10 °C
Cementitious R4 grout for installing equipment, columns, joints and anchors at sub-zero temperatures; 15 MPa after 6 hours at −25 °C.
Price on request
INDASTRO
LEVELINE FC807 non-sparking dry-shake topping — for explosion and fire hazard sites
Dry mix for hardening concrete floors that does not spark on impact, for workshops and warehouses with explosion-safety requirements; from 70 MPa.
Price on request