The FE871 AS self-levelling antistatic coating is laid over the FE851 AS conductive primer — together they form a floor that dissipates static charge. Electrical resistance 10⁶–10⁸ Ω, Shore D hardness at least 80, adhesion to concrete at least 2.5 MPa. The standard colour is grey RAL 7040; tinting is possible. It dries in 24 hours at +20 °C and in 12 hours at +30 °C. It is used in electronics manufacturing, cleanrooms, data centres, medicine and the chemical industry.
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | epoxy floors |
| Use | antistatic/conductive, production workshops |
| Base | epoxy resin, plasticiser, filler + cycloaliphatic amine hardener |
| Colour | grey RAL 7040, tinting to RAL |
| Packaging | component A — 24 kg metal drum; component B — 3.6 kg |
| Application method | A:B = 1:0.15 |
| Curing | drying at +10 °C — 48 h, +20 °C — 24 h, +30 °C — 12 h; next coat after 12–48 h |
| Key properties | Electrical resistance 10^6-10^8 Ω; Shore D hardness (7 days) at least 80; Taber abrasion 39; adhesion to concrete at least 2.5 MPa; density 1.4 ± 0.05 kg/l; chemical resistance — on request |
| Consumption | 1.4 kg/m2 at a layer thickness of 1 mm |
| Shelf life | 6 months; storage +5…+30 °C |
| Standards | manufacturer's TU; SP 29.13330.2011 (Appendix V) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Cementitious grout for installing equipment, column bases, joints and anchors; 70 MPa in compression at 28 days, W20, workability from 45 minutes.
Solvent-free epoxy primer for self-levelling and decorative polymer floors, also a stand-alone impregnation; adhesion to concrete from 2.5 MPa.
Fibre-reinforced finishing mortar for fine finishing of concrete structures in winter at temperatures from −10 to +10 °C; compressive strength 40 MPa at 28 days.
Ultra-rapid-hardening R4 grout for equipment, anchors and sleepers in track concrete; 10 MPa in compression after just 2 hours.
Epoxy self-levelling floor with 100% solids for workshops, warehouses, car parks, food and pharmaceutical plants; Shore D hardness from 85.
Fibre-reinforced finishing mortar for repairing load-bearing, bridge and underground concrete structures; aggregate 0.315 mm, compressive strength 30 MPa at 28 days.
