INDASTRO
Profskrin RC80 Lq — flowable R4 repair mortar for concrete of class B60 and above
Flowable R4 mortar for structural repair of B60 concrete and above; at least 35 MPa after 24 hours and 80 MPa after 28 days.
Price on request
INDASTRO
Profskrin RC30 PSm — fibre-reinforced finishing repair mortar with fine aggregate
The finishing mortar Profskrin RC30 PSm has an aggregate size of only 0.315 mm, and fibre is included in its formulation. It is used for structural repair of load-bearing building and bridge structures, treatment and industrial facilities, underground ducts and pipelines. Compressive strength rises from 5 MPa after 24 hours to 20 MPa after 7 days and 30 MPa after 28 days; bond to the substrate from 1.5 MPa, workability is retained for 60 minutes, frost resistance at least 300 cycles.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tanks and treatment plants, industrial buildings, columns and beams |
| Base | Portland cement, aggregate, fibre, modifying admixtures |
| Packaging | bags 25 kg |
| Application method | Profskrin RC30 PSm finishing repair mortar is used for structural repair of concrete structures: Load-bearing building structures; Bridge structures; Treatment facilities; Underground engineering structures; Industrial structures |
| Application temperature | +5…+35 °C |
| Key properties | mixing water: 0.28-0.3; maximum aggregate size, mm: 0.315; compressive strength at 24 h: ≥5 MPa; compressive strength at 7 days: ≥20 MPa; compressive strength at 28 days: ≥30 MPa; flexural strength at 28 days: ≥4 MPa; bond strength to substrate: ≥1.5 MPa; workability retention: 60 min; frost resistance: ≥300 cycles |
| Shelf life | 12 months in the original factory packaging from the date of manufacture, in a dry room |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Profskrin RC40 FSm — winter finishing mortar for fine finishing of concrete
Fibre-reinforced finishing mortar for fine finishing of concrete structures in winter at temperatures from −10 to +10 °C; compressive strength 40 MPa at 28 days.
Price on request
INDASTRO
LEVELINE FA892 acrylic primer — for cement self-levelling floors and screeds
Acrylic primer with antiseptic for concrete before self-levelling floors, screeds and toppings indoors; tack-free in 60 minutes.
Price on request
INDASTRO
Khimskrin SE 2k — epoxy protective compound for treatment plants and sewers
Two-component epoxy coating protecting concrete of treatment plants and sewers against sulphuric acid and hydrogen sulphide; contact with drinking water is permitted.
Price on request
INDASTRO
Profskrin RC470 — R4 repair mortar for structures of class B50 and above
Thixotropic R4 mortar for repairing high-strength concrete and reinforced concrete of B50 and above; 70 MPa at 28 days, water impermeability W20.
Price on request
INDASTRO
Innolayn NC40 RF3 — R4 grout for work at −25…−10 °C
Cementitious R4 grout for installing equipment, columns, joints and anchors at sub-zero temperatures; 15 MPa after 6 hours at −25 °C.
Price on request