INDASTRO
Innolayn NC40 RF3 — R4 grout for work at −25…−10 °C
Cementitious R4 grout for installing equipment, columns, joints and anchors at sub-zero temperatures; 15 MPa after 6 hours at −25 °C.
Price on request
INDASTRO
Profskrin RC40 FSm — winter finishing mortar for fine finishing of concrete
When fine finishing of concrete has to be done in winter, Profskrin RC40 FSm is used: a finishing mortar designed for temperatures from −10 to +10 °C. It is suitable for load-bearing and bridge structures, treatment and industrial facilities, underground ducts and pipelines. Its strength values are the same as those of Profskrin RC40 Sm: from 20 MPa in compression after 24 hours, 30 MPa after 7 days and 40 MPa after 28 days, and the mix stays workable for 30 minutes.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tanks and treatment plants, industrial buildings, columns and beams |
| Base | Portland cement, graded sand with particle size up to 0.63 mm, fibre, modifying admixtures |
| Packaging | bags 25 kg |
| Application method | Profskrin RC40 FSm finishing repair mortar is used for fine finishing of concrete structures in winter: Load-bearing building structures; Bridge structures; Treatment facilities; Underground engineering structures; Industrial structures |
| Application temperature | −10…+10 °C |
| Key properties | mixing water: 0.16-0.17; compressive strength at 24 h: ≥20 MPa; compressive strength at 7 days: ≥30 MPa; compressive strength at 28 days: ≥40 MPa; flexural strength at 28 days: ≥6 MPa; bond strength to substrate: ≥1.5 MPa; workability retention: 30 min; frost resistance: ≥300 cycles; maximum aggregate size, mm: 0.63 |
| Shelf life | 12 months in the original factory packaging from the date of manufacture, in a dry room |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Profskrin LC2.5 — anti-corrosion compound for rebar and bonding layer
Cementitious compound for protecting reinforcement against corrosion and forming a bonding layer in concrete repair; bond to the substrate from 2.0 MPa.
Price on request
INDASTRO
Khimskrin SE 2k — epoxy protective compound for treatment plants and sewers
Two-component epoxy coating protecting concrete of treatment plants and sewers against sulphuric acid and hydrogen sulphide; contact with drinking water is permitted.
Price on request
INDASTRO
Profskrin RC45 — R4 repair mortar for B30–B40 concrete structures
Thixotropic R4 mortar for repairing B30–B40 concrete and reinforced concrete structures, including walls and ceilings; compressive strength at 28 days from 45 MPa.
Price on request
INDASTRO
LEVELINE FP840 one-component polyurethane primer — hardening impregnation for concrete
Moisture-curing polyurethane primer for polymer floors and stand-alone impregnation of concrete in workshops and warehouses; fire hazard class KM1.
Price on request
INDASTRO
Innolayn NC610 — high-strength cementitious grout with water impermeability W20
Cementitious grout for installing equipment, column bases, joints and anchors; 70 MPa in compression at 28 days, W20, workability from 45 minutes.
Price on request