INDASTRO
LEVELINE FA892 acrylic primer — for cement self-levelling floors and screeds
Acrylic primer with antiseptic for concrete before self-levelling floors, screeds and toppings indoors; tack-free in 60 minutes.
Price on request
INDASTRO
Innolayn NC610 — high-strength cementitious grout with water impermeability W20
If a grout needs a margin of strength and water impermeability, Innolayn NC610 is chosen: by 28 days it reaches at least 70 MPa in compression and 9 MPa in flexure, and its grades are W20 and F2 400. The grout is used for high-precision installation of industrial equipment, grouting under column bases, monolithic joining of joints in reinforced concrete structures, installation of anchors and repair of concrete by pouring. The mix retains workability for at least 45 minutes, effective contact area from 85 %.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus, Nevinnomyssk |
|---|---|
| Type | cementitious grouts |
| Use | equipment foundations, anchoring of rebar and bolts, columns and beams |
| Base | Portland cement, mineral filler, modifying admixtures. |
| Packaging | bags 25 kg |
| Application method | Innolayn NC610 grout is used for high-precision installation of industrial equipment, grouting under column bases, repair and restoration of concrete and reinforced concrete by pouring, monolithic joining of joints in reinforced concrete structures and installation of anchors. |
| Application temperature | +5…+30 °C |
| Curing | protection against moisture loss for at least 24 h (water spraying or wet hessian) |
| Key properties | mixing water: 3.5-4; maximum aggregate size, mm: 3; workability (cone spread): 290 – 350 mm; workability retention: ≥45 min; effective contact area: ≥85 %; flexural strength at 24 h: ≥5 MPa; flexural strength at 28 days: ≥9 MPa; compressive strength at 24 h: ≥35 MPa; compressive strength at 28 days: ≥70 MPa; bond strength to substrate: ≥2 MPa; linear expansion/shrinkage: ≤0.8 mm/m; restrained expansion: ≤0.95 mm/m; service in aggressive environments: 5< pH <14; sulphate resistance coefficient (365 days): 0.9; frost resistance: F1 1000; frost resistance (road and airfield concrete, mineralised medium): F2 400; water impermeability: W20; service temperature: -60…+80 °C |
| Shelf life | 24 months in plastic packaging from the date of manufacture, in a dry room |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Innolayn NC40 RF3 — R4 grout for work at −25…−10 °C
Cementitious R4 grout for installing equipment, columns, joints and anchors at sub-zero temperatures; 15 MPa after 6 hours at −25 °C.
Price on request
INDASTRO
Khimskrin LE 2k — chemical-resistant epoxy primer for concrete in aggressive environments
Two-component chemically resistant epoxy primer on concrete under lining and Khimskrin SE 2k coating; pot life at 20 °C at least 60 minutes.
Price on request
INDASTRO
LEVELINE FP860 polyurethane self-levelling floor — elastic solvent-free coating
Elastic polyurethane self-levelling floor for workshops, warehouses, offices and schools; elongation at break from 40%, service from −60 to +80 °C.
Price on request
INDASTRO
LEVELINE FS1-4 inert aggregate — graded sand for polymer compounds
Graded sand with 0.1–0.4 mm particles for filling epoxy and polyurethane compounds and creating an anti-slip surface.
Price on request
INDASTRO
Innolayn NC60 — cementitious grout for high-precision equipment installation
Cementitious grout for installing presses, machine tools, pumps and compressors, grouting under columns and repair by pouring; 60 MPa at 28 days.
Price on request