INDASTRO
Profskrin RC462 I — expanding cementitious compound for injection and anchoring
Finely dispersed expanding cementitious compound for injection grouts, filling voids and cracks, anchors and equipment installation; 60 MPa.
Price on request
INDASTRO
LEVELINE FE850 two-component epoxy primer — for polymer floors
The FE850 primer consists of an epoxy resin and a phenalkamine hardener, contains no solvents, and its solids content is 98%. It is used under epoxy paint, self-levelling and decorative coatings, and, when applied in several coats to a gloss, as a stand-alone impregnation; mixed with quartz sand it makes a putty. Adhesion to concrete is at least 2.5 MPa, foot traffic is allowed after 3 days, full mechanical load after 7 days.
Specifications
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | floor primers |
| Use | production workshops, warehouses and logistics, decorative |
| Base | epoxy resin + phenalkamine hardener, solvent-free |
| Colour | clear amber-coloured liquid |
| Packaging | 24 kg kit: component A — 16 kg metal pail; component B — 8 kg plastic canister |
| Application method | primer for epoxy paint/self-levelling/decorative coatings or stand-alone impregnation (2-3 coats to a gloss); putty with quartz sand 1:2–1:5; A:B = 2:1 by weight |
| Application temperature | air and substrate +5…+30 °C; material +15…+25 °C |
| Curing | drying at 21 °C no more than 24 h; foot traffic after 3 days; full mechanical load after 7 days; next coat after 12–48 h at 20 °C |
| Key properties | Solids content 98%; adhesion to concrete at least 2.5 MPa; pot life at 21 °C at least 40 min (+10 °C — 80 min, +20 °C — 60 min, +30 °C — 30 min); density 1.0-1.1 kg/l |
| Consumption | 140 g/m2 per coat (2-3 coats recommended) |
| Shelf life | 12 months; storage +5…+25 °C |
| Standards | manufacturer's TU; SP 29.13330.2011, SP 71.13330.2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
LEVELINE FC807 non-sparking dry-shake topping — for explosion and fire hazard sites
Dry mix for hardening concrete floors that does not spark on impact, for workshops and warehouses with explosion-safety requirements; from 70 MPa.
Price on request
INDASTRO
LEVELINE FC70 S quartz dry-shake topping — hardening fresh concrete floors
Dry quartz mix for hardening freshly laid concrete in workshops, warehouses and car parks; compressive strength from 70 MPa at 28 days.
Price on request
INDASTRO
Profskrin RC40 Sm — fibre-reinforced finishing mortar, 40 MPa at 28 days
Finishing repair mortar with fibre and sand up to 0.63 mm for load-bearing, bridge and treatment structures; compressive strength from 20 MPa after one day.
Price on request
INDASTRO
Innolayn NC60 SFiber — two-component grout with steel reinforcing fibre
Grout of cementitious mix and steel fibre for installing equipment, columns, bridges and airfields; flexural from 14 MPa, compressive from 60 MPa at 28 days.
Price on request
INDASTRO
LEVELINE FP860 polyurethane self-levelling floor — elastic solvent-free coating
Elastic polyurethane self-levelling floor for workshops, warehouses, offices and schools; elongation at break from 40%, service from −60 to +80 °C.
Price on request