The FE 2k/100 coating is approved for use at food and pharmaceutical industry facilities, so it is chosen for such production sites, as well as for shopping centres, schools, medical institutions, chemical plants and car parks. The compound is solvent-free with 100% solids; the standard colour is grey RAL 7040, and tinting is possible. Shore D hardness is at least 85, compressive strength from 60 MPa, adhesion to concrete from 2.5 MPa. In direct sunlight the shade may change.
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | epoxy floors |
| Use | retail and public, production workshops, warehouses and logistics, car parks and ramps, food and pharmaceutical, chemically resistant |
| Base | filled epoxy resin + cycloaliphatic amine hardener; 100% solids |
| Colour | grey RAL 7040, tinting to RAL |
| Packaging | 27.6 kg kit: component A — 24 kg metal drum/pail; component B — 3.6 kg |
| Application method | poured onto a primed substrate (concrete of class no lower than B15 / cement-sand screed no lower than 20 MPa); next coat after 12–48 h |
| Curing | recoat interval 12–48 h at (20±2) ℃ |
| Key properties | Shore D hardness (7 days) at least 85; Taber abrasion 35; compressive strength at least 60 MPa; flexural strength at least 35 MPa; adhesion to concrete at least 2.5 MPa; density 1.6 ± 0.05 kg/l; chemical resistance — on request to technical support |
| Shelf life | 6 months; storage +5…+25 °C |
| Standards | manufacturer's TU; SP 29.13330.2011 (Appendix V), SP 71.13330.2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Fibre-reinforced finishing mortar for repairing load-bearing, bridge and underground concrete structures; aggregate 0.315 mm, compressive strength 30 MPa at 28 days.
Two-component epoxy coating protecting concrete of treatment plants and sewers against sulphuric acid and hydrogen sulphide; contact with drinking water is permitted.
Clear polyurethane sealer for curing freshly laid concrete and toppings in workshops and warehouses; dries in 2 hours at +20 °C.
Non-combustible non-sparking screed for levelling substrates in workshops and warehouses with explosion-safety requirements; walkable after about 12 hours.
Flowable R4 mortar for structural repair of load-bearing, bridge, treatment and underground structures; compressive strength 45 MPa at 28 days, W12.
Cementitious grout for installing equipment, columns, joints and anchors at low temperatures; 10 MPa after 6 hours at −10 °C, 50 MPa at 28 days.
