INDASTRO
LEVELINE FC801 Cr corundum dry-shake topping — hardening industrial floors
Corundum dry mix for workshop and warehouse floors with medium and increased loads; abrasion class AR0.5 to EN 13892-4.
Price on request
INDASTRO
LEVELINE FP890 one-component polyurethane sealer — curing fresh concrete
The one-component polyurethane sealer is applied to freshly laid concrete or topping to reduce water evaporation while strength develops. The product is clear and can be applied at substrate temperatures from +5 to +35 °C; drying to degree 3 at +20 °C takes about 2 hours. The material is flammable: it must be applied without open flame and in a ventilated room. It is supplied in 23 kg containers.
Specifications
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | impregnations and concrete hardeners |
| Use | production workshops, warehouses and logistics |
| Base | polyurethane, one-component |
| Colour | clear |
| Packaging | 23 kg |
| Application method | curing of freshly laid concrete and topping (reducing water evaporation) |
| Application temperature | substrate +5…+35 °C; application +5…+35 °C |
| Curing | drying to degree 3 at +20 °C — 2 hours |
| Key properties | Density 0.9-1.1 g/cm3; non-volatile content at least 21%; viscosity 14 ± 2 s (VZ-246, 4 mm nozzle) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
LEVELINE FC807 non-sparking dry-shake topping — for explosion and fire hazard sites
Dry mix for hardening concrete floors that does not spark on impact, for workshops and warehouses with explosion-safety requirements; from 70 MPa.
Price on request
INDASTRO
Khimskrin LE 2k — chemical-resistant epoxy primer for concrete in aggressive environments
Two-component chemically resistant epoxy primer on concrete under lining and Khimskrin SE 2k coating; pot life at 20 °C at least 60 minutes.
Price on request
INDASTRO
Profskrin RC60 F — winter R4 mortar for high-strength concrete at −10…+10 °C
Thixotropic R4 mortar for repairing high-strength concrete structures in winter, at temperatures from −10 to +10 °C; 60 MPa in compression at 28 days.
Price on request
INDASTRO
Profskrin RC35 Sm — fibre-reinforced mortar for repair and finishing of concrete
Fibre-reinforced mortar with sand up to 0.63 mm for repair and finishing of concrete structures of bridges, treatment plants and underground facilities; W12.
Price on request
INDASTRO
LEVELINE FC810 pourable topping — for new and worn concrete floors
Pourable hardening mortar for fresh concrete and for repairing worn floors in workshops and warehouses; abrasion class AR1 to EN 13892-4.
Price on request