INDASTRO
Innolayn NC620 R — ultra-rapid-hardening R4 grout for fast-track installation
Ultra-rapid-hardening R4 grout for equipment, anchors and sleepers in track concrete; 10 MPa in compression after just 2 hours.
Price on request
INDASTRO
INDASTRO LEVELINE FK891 curing compound for freshly laid concrete — solvent-free
The compound based on polyurethane-acrylic resin and water, solvent-free, is sprayed or rolled onto concrete and topping 1–2 hours after floating or immediately after grinding. The film reduces water evaporation, so the surface gains strength and wear resistance; it should not be covered with plastic sheeting. Besides floors, FK891 is used on road pavements and engineering structures. It keeps for 24 months and withstands 5 freeze-thaw cycles.
Specifications
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | impregnations and concrete hardeners |
| Use | production workshops, warehouses and logistics, outdoor areas |
| Base | polyurethane-acrylic resin, water; solvent-free |
| Colour | homogeneous white liquid |
| Packaging | plastic canisters 10 kg |
| Application method | sprayer, roller (12-16 mm pile), brush, squeegee; 1-2 h after floating the topping/concrete or immediately after grinding; 1-2 coats; do not cover with plastic sheeting |
| Application temperature | +10…+35 °C (substrate and application); air humidity no more than 80% |
| Curing | drying to degree 3 at +20 °C no more than 3 h |
| Key properties | Non-volatile content at least 35%; density 0.95-1.0 g/cm3; viscosity 18 ± 2 s (VZ-246, 4 mm nozzle); reduces water evaporation, increases strength and wear resistance |
| Consumption | 100-150 g/m2 for toppings and floated surfaces; up to 200 g/m2 for porous concrete (below M200) |
| Shelf life | 24 months; storage +5…+25 °C; withstands 5 freeze-thaw cycles |
| Standards | manufacturer's TU |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Khimskrin LE 2k — chemical-resistant epoxy primer for concrete in aggressive environments
Two-component chemically resistant epoxy primer on concrete under lining and Khimskrin SE 2k coating; pot life at 20 °C at least 60 minutes.
Price on request
INDASTRO
Profskrin RC40 Sm — fibre-reinforced finishing mortar, 40 MPa at 28 days
Finishing repair mortar with fibre and sand up to 0.63 mm for load-bearing, bridge and treatment structures; compressive strength from 20 MPa after one day.
Price on request
INDASTRO
LEVELINE FC806 non-sparking screed — base for an explosion-proof floor
Non-combustible non-sparking screed for levelling substrates in workshops and warehouses with explosion-safety requirements; walkable after about 12 hours.
Price on request
INDASTRO
Profskrin RC60 F — winter R4 mortar for high-strength concrete at −10…+10 °C
Thixotropic R4 mortar for repairing high-strength concrete structures in winter, at temperatures from −10 to +10 °C; 60 MPa in compression at 28 days.
Price on request
INDASTRO
Profskrin RC45 F — winter thixotropic R4 mortar for work at −10…+10 °C
Winter version of the thixotropic R4 mortar for repairing B30–B40 concrete at temperatures from −10 to +10 °C; compressive strength at 28 days from 45 MPa.
Price on request