Profskrin RC35 is a thixotropic cementitious mortar of class R3 to GOST R 56378 for structural repair of concrete and reinforced concrete columns, beams and other elements of industrial buildings. Class R3 and compressive strength from 35 MPa at 28 days set it apart from the higher-class mortars of the RC range. After 24 hours the mix reaches at least 15 MPa in compression, bond to the substrate is from 1.5 MPa, water impermeability W12, frost resistance F1 600.
| Manufacturer | INDASTRO — OOO Sedrus, Kolomna, Nevinnomyssk, Berdsk, Ulyanovsk |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams |
| Base | Portland cement, mineral filler, modifying admixtures. |
| Packaging | paper bags 25 kg (Kolomna, Berdsk production units); plastic bags 25 kg (Ulyanovsk production unit); plastic bags 25 kg (Nevinnomyssk production unit) |
| Application method | Profskrin RC35 repair mortar is used for structural repair of concrete and reinforced concrete structures. Class R3 in accordance with GOST R 56378. |
| Application temperature | +5…+30 °C |
| Curing | protection against moisture loss for at least 24 h (water spraying or wet hessian) |
| Key properties | mixing water: 3.5-3.75 (Kolomna (K) Berdsk (S) Ulyanovsk (U)); 4.25-4.5 (Nevinnomyssk (N)); maximum aggregate size, mm: 3; workability (cone spread): 120 – 140 mm; workability retention: ≥30 min; flexural strength at 24 h: ≥2 MPa; flexural strength at 28 days: ≥5 MPa; compressive strength at 24 h: ≥15 MPa; compressive strength at 28 days: ≥35 MPa; bond strength to substrate: ≥1.5 MPa; linear expansion/shrinkage: ≤1.0 mm/m; service in aggressive environments: 5< pH <14; frost resistance: F1 600; frost resistance (road and airfield concrete, mineralised medium): F2 200; water impermeability: W12; service temperature: -60…+80 °C |
| Shelf life | 12 months in paper packaging, 24 months in plastic packaging from the date of manufacture, in a dry room |
| Standards | class R3 to GOST R 56378 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-shrink flowable R4 mortar with fibre for heavily reinforced areas, bridges, roads, airfields and joints; 60 MPa at 28 days, work from −10 °C.
Solvent-free epoxy primer for self-levelling and decorative polymer floors, also a stand-alone impregnation; adhesion to concrete from 2.5 MPa.
Moisture-curing polyurethane primer for polymer floors and stand-alone impregnation of concrete in workshops and warehouses; fire hazard class KM1.
Dry quartz mix for hardening freshly laid concrete in workshops, warehouses and car parks; compressive strength from 70 MPa at 28 days.
Two-component epoxy coating protecting concrete of treatment plants and sewers against sulphuric acid and hydrogen sulphide; contact with drinking water is permitted.
Thixotropic R4 mortar for repairing high-strength concrete and reinforced concrete of B50 and above; 70 MPa at 28 days, water impermeability W20.
