BIRSS
BIRSS 67 Shpurovaya — non-shrink injection compound for anchors and cracks
Flowable cementitious compound for crack injection, anchor fixing, grouting of bearings and soil stabilisation; water retention at least 98 %.
Price on request
BIRSS
BIRSS 59 S1 M1000 — non-shrink self-compacting concrete mix for grouting
The self-compacting non-shrink concrete mix BIRSS 59 S1 M1000 is made with high-grade cements and graded quartz and granite aggregates. It is used to concrete and strengthen structures of buildings and hydraulic facilities, repair columns, beams and supports, grout and anchor equipment, and fill rigid joints between precast elements. Setting starts no earlier than 15 and ends no later than 25 minutes; compressive strength 40 MPa after one day and 100 MPa at 28 days, class R4, W 16.
Specifications
| Manufacturer | BIRSS — AO Opytny Zavod Sukhikh Smesey (Experimental Dry Mix Plant), Moscow |
|---|---|
| Type | cementitious grouts |
| Use | equipment foundations, anchoring of rebar and bolts, columns and beams, hydraulic structures and dams |
| Base | BIRSS 59S1 M1000 is a non-shrink self-compacting dry concrete mix based on special high-grade cements, high-quality natural fillers, graded quartz and granite aggregates and chemical admixtures that improve the strength and adhesion properties of the mix. |
| Colour | light grey |
| Packaging | bags 25 / 40 kg |
| Application method | BIRSS 59 S1 M1000 is a self-compacting dry concrete mix recommended for concreting and strengthening reinforced concrete and concrete structures in: construction and restoration of buildings and structures; construction of hydraulic facilities; repair of concrete and reinforced concrete structures of industrial and civil buildings: columns, beams, supports; grouting and re-concreting, anchoring of equipment; filling rigid joints between precast concrete elements; it is used in the manufacture of produ… |
| Application temperature | +5…+35 °C |
| Key properties | maximum aggregate size, mm: 5.0/10.0; workability grade: Rk4/ 18-22; setting time: initial not earlier than 15 min, final not later than 25 min; workability retention, min: 25; bond strength to substrate, MPa: 2.0; compressive strength, MPa, not less than - 1 day/3 days 40/60 - 7 days/28 days 90/100; flexural strength, MPa, not less than - 1 day/3 days 7/9 - 7 days/28 days 12/14; modulus of elasticity, MPa: 25,000; water impermeability: W 16; frost resistance: F2 400; sulphate resistance coefficient: 0.9; service temperature, °C: from -50 to +70 |
| Standards | class R4 to GOST R 56378; STO 05668056-004-2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by BIRSS
BIRSS
BIRSS 59 S2 M600 Moroz Uskorennaya — R4 mix gaining 20 MPa in 2 hours at +20 °C
Accelerated-hardening thixotropic mortar for repairing bridges, tunnels and joints at temperatures from −10 °C; 20 MPa after 2 hours at +20 °C.
Price on request
BIRSS
BIRSS UK-1 hardener — quartz topping for concrete floors
Dry quartz-filled hardening mix for medium-duty floors in production halls, warehouses and car parks; compressive strength from 60.0 MPa.
Price on request
BIRSS
BIRSS Multipol Terrazzo — epoxy binder for terrazzo floors
Decorative epoxy self-levelling floor with marble filler for railway stations, foyers, restaurants, shops and hotel lobbies.
Price on request
BIRSS
BIRSS Singlfleks impregnation — polyurethane impregnation for concrete
One-component polyurethane impregnation for consolidating and dustproofing weak porous substrates; can be applied from −10 °C.
Price on request
BIRSS
BIRSS RSM-2M M550 Moroz — R4 repair mix with anti-freeze admixture
Mix for hand repair of joints, cracks and concrete defects without formwork at low and sub-zero temperatures; at +20 °C it reaches 55 MPa in 28 days.
Price on request