REKS
REKS® AKRILIK ELAST VN — acrylic polymer concrete for expansion joints and slab edges
Rapid-hardening highly filled acrylic polymer concrete with a reduced modulus of elasticity for expansion joints, slab edges and sleepers.
Price on request
REKS
REKS® StruktoLit — expanding cementitious binder for injection grouts and concrete
The highly flowable expanding cementitious binder REKS® StruktoLit is used to prepare injection grouts, mortars and concrete. These are used to repair and build road and airfield pavements by the colmatation method, bridge structures and civil buildings, to fill cavities and cracks in porous concrete and masonry by pouring or injection, to consolidate foundations and to fill rigid joints with shrinkage-compensated concrete. The injection grout reaches at least 80 MPa in compression at 28 days and expands by at least 0.3 % in the plastic phase, mortar and concrete reach from 62 MPa.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | cementitious grouts |
| Use | roads and airfields, bridges and overpasses, anchoring of rebar and bolts, tanks and treatment plants |
| Base | highly flowable/expanding cementitious binder for preparing injection grouts, mortars and concrete |
| Colour | grey |
| Packaging | bag 20 kg |
| Application method | preparation of high-strength mortars and concretes used for repair and construction of road and airfield pavements (by the colmatation method), bridge structures and civil buildings; filling cavities and cracks in porous concrete and in rubble, stone and brick masonry by pouring or injection; preparation of shrinkage-compensated concrete for consolidating foundations; preparation of non-segregating shrinkage-compensated concrete for filling rigid joints; preparation… |
| Key properties | concrete: 300–400 kg/m³: packaging; compressive strength at 1 day, mortar/concrete: ≥18 MPa; compressive strength at 1 day, injection grout: ≥30 MPa; compressive strength at 7 days, mortar/concrete: ≥42 MPa; compressive strength at 7 days, injection grout: ≥65 MPa; compressive strength at 28 days, mortar/concrete: ≥62 MPa; compressive strength at 28 days, injection grout: ≥80 MPa; flexural strength at 1 day, mortar/concrete: ≥5 MPa; flexural strength at 1 day, injection grout: ≥5 MPa; flexural strength at 7 days, mortar/concrete: ≥7 MPa; flexural strength at 7 days, injection grout: ≥6 MPa; flexural strength at 28 days, mortar/concrete: ≥9 MPa; flexural strength at 28 days, injection grout: ≥8 MPa; workability of the mix, mortar/concrete: 160–180 mm; density, mortar/concrete: 2.24 kg/l; density, injection grout: 2–2.1 kg/l; segregation (cement laitance separating on the surface), mortar/concrete: none; flowability of the mix measured with a Marsh cone, injection grout: 30 seconds; expansion in the plastic phase, injection grout: ≥0.3 %; initial setting time, injection grout: <300 minutes; initial setting time, mortar/concrete: <300 minutes; final setting time, injection grout: <420 minutes; final setting time, mortar/concrete: <420 minutes |
| Shelf life | 12 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Akrisil L — acrylic grout for equipment and rails, work from −10 °C
Acrylic resin grout for fixing equipment with dynamic loads and rails; applied at temperatures from −10 to +25 °C.
Price on request
REKS
REKS® Fab-10P — fibre-reinforced concrete mix with crushed granite for pavement repair
Non-shrink R4 concrete mix supplied with crushed granite for repairing airfield and road pavements, industrial floors and bridge piers.
Price on request
REKS
REKS® PRAYMER — one-component primer for cleaned rebar before concrete repair
One-component primer with corrosion inhibitors for cleaned rebar before concrete repair; supplied in 5 and 10 kg pails and 20 kg bags.
Price on request
REKS
REKS® FIKS EPO T — two-component epoxy for anchoring and base plates
Multi-purpose epoxy for anchoring bars, bolts and barrier posts, base plates and rails; compressive strength from 90 MPa in 7 days.
Price on request
REKS
REKS® AR FM — R4 repair mortar for wet spraying, supplied with fibre
Thixotropic class R4 mortar for repairing bridges, tunnels and columns by spraying or trowel; each bag comes with a pail of fibre, flexure from 12 MPa.
Price on request