Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
REKS® FIKS EPO T — two-component epoxy for anchoring and base plates
REKS

REKS® FIKS EPO T — two-component epoxy for anchoring and base plates

Epoxy grouts

The multi-purpose two-component epoxy compound REKS® FIKS EPO T is produced in grey and red. It is used to anchor rebar, anchors, studs, bolts, tie rods, posts of road safety barriers, fences and railings, to make supports under bearing plates and bridge bearings, and to fix rails in sleeperless track. After 7 days compressive strength is at least 90 MPa, tensile strength from 30 MPa, impact strength from 20 kJ/m²; curing takes about 24 hours, the gel time is from 60 minutes for the grey and from 20 minutes for the red version.

Specifications

ManufacturerREKS — OOO “SPS”
Typeepoxy grouts
Useequipment foundations, anchoring of rebar and bolts, bridges and overpasses, tunnels and metro
Basetwo-component multi-purpose epoxy compound
Colourgrey, red
Packagingkit 12.5 kg: grey — A 8.35 kg + B 4.15 kg; red — A 10.76 kg + B 1.74 kg (metal pails)
Application methodconstruction of supports under metal bearing plates, precise setting of base plates, construction of bridge bearings and mechanical connections; fixing of rails in sleeperless track; as a high-strength grout and for anchoring rebar, anchors, studs, bolts, tie rods, posts of road safety barriers, fence posts and railing posts; as a bedding or fixing…
Application temperaturecomponents at +20 °C before use; surface 3 °C above the dew point
Curingcuring about 24 h; full readiness 7 days
Key propertiesviscosity of component A: ≤5,000 cP (grey), 500–1,000 cP (red); viscosity of component B: ≤500 / ≤1,000 cP; gel time (100 g): ≥60 min (grey), ≥20 min (red); compressive strength at 7 days: ≥90 MPa; tensile strength at 7 days: ≥30 MPa; elongation: ≥10 %; adhesion to metal at 7 days: ≥5 MPa; to concrete: exceeds the cohesion of concrete; modulus of elasticity at 7 days: ≥3,000 MPa; impact strength: ≥20 kJ/m²
Shelf life12 months from the date of manufacture; storage at +10…+25 °C

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by REKS