REKS
REKS® PRAYMER — one-component primer for cleaned rebar before concrete repair
One-component primer with corrosion inhibitors for cleaned rebar before concrete repair; supplied in 5 and 10 kg pails and 20 kg bags.
Price on request
REKS
REKS® Fiks Epo T/VN ESh — two-component epoxy grout, 98 MPa in 7 days
Unlike the three-component grouts of the T/VN range, REKS® Fiks Epo T/VN ESh is a two-component compound: component A is a grey paste weighing 24 kg, component B weighs 3 kg. The high-strength epoxy resin grout is used for base plates and bridge bearings, mechanical connections, screeds with very high loads, fixing rails in sleeperless track and anchoring bars, studs and bolts. Compressive strength is at least 70 MPa after one day and 98 MPa after 7 days, the pot life at +20 °C is about 60 minutes.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | epoxy grouts |
| Use | equipment foundations, anchoring of rebar and bolts, bridges and overpasses, tunnels and metro, floors |
| Base | two-component high-strength epoxy resin-based grout (component A — grey paste) |
| Colour | grey |
| Packaging | kit 27 kg: component A 24 kg, component B 3 kg (metal pails) |
| Application method | construction of supports under metal bearing plates, precise setting of base plates, construction of bridge bearings and mechanical connections; construction of screeds in premises with very high loads and heavy traffic; fixing of rails in sleeperless track; as a high-strength grout and for anchoring rebar, anchors, studs, bolts and tie rods |
| Application temperature | components at about +20 °C before use; surface 3 °C above the dew point |
| Curing | pot life at +20 °C about 60 min |
| Key properties | adhesion to concrete: exceeds the cohesion of concrete; adhesion to metal: at 7 days ≥6 MPa; compressive strength at 7 days: ≥98 MPa; freeze-thaw resistance at 7 days: ≥F200; flexural strength: at 7 days ≥25 MPa; density of the mixed compound: ≥1.75 g/cm³; compressive strength at 1 day: ≥70 MPa; modulus of elasticity: at 7 days ≥5,000 MPa; gel time: ≥90 minutes; water absorption: at 1 day ≤0.4 % |
| Shelf life | 16 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Torkret — dry mix for shotcreting mine workings and concrete
Ready dry mix for dry shotcreting of mine workings, rock bases and damaged concrete, brick and stone; compression from 45 MPa at 28 days.
Price on request
REKS
REKS® Strukto 60 — fibre-reinforced thixotropic R4 repair mortar, 60 MPa
Non-shrink fibre-reinforced R4 mortar for repairing bridges, tunnels, dams and columns; compressive strength at 28 days at least 60 MPa.
Price on request
REKS
REKS® Fiks Epo Tiks — epoxy-based chemical anchor for rebar and studs
Two-component epoxy chemical anchor for bonding rebar, anchors and studs of any diameter into B15–B60 concrete, stone and brick.
Price on request
REKS
REKS® R3 — class R3 repair mortar, 40 MPa, for interior and exterior work
Non-shrink thixotropic class R3 mortar for local repair and levelling of reinforced concrete in industrial buildings and tanks; compression from 40 MPa.
Price on request
REKS
REKS® Epolit — three-component epoxy grout for anchor pockets and equipment
Highly filled cold-curing epoxy for filling anchor pockets and grouting under turbines, compressors and pumps; 100 MPa in 7 days.
Price on request