REKS
REKS® Strukto 70 — thixotropic R4 repair mortar, 70 MPa, W20
Fibre-reinforced R4 repair mortar for bridges, dams, tunnels and columns with compressive strength from 70 MPa and water impermeability W20.
Price on request
REKS
REKS® Strukto 60 — fibre-reinforced thixotropic R4 repair mortar, 60 MPa
REKS® Strukto 60 is a non-shrink fibre-reinforced thixotropic cementitious mortar of class R4 per GOST R 56378 for the repair and waterproofing of concrete and reinforced concrete structures of bridges, overpasses, tunnels, dams and tanks. It is used to restore beams and columns, including prestressed ones, elements in a marine environment, under repeated loading and exposed to sulphates and mineral oils. At 28 days it provides at least 60 MPa in compression and 2.5 MPa of bond to the substrate, with an aggregate size of 2.5 mm, F2 400 and W16.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, industrial buildings, tanks and treatment plants, columns and beams |
| Base | non-shrink fibre-reinforced thixotropic cementitious repair mortar |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | repair and waterproofing of damaged elements of concrete and reinforced concrete structures; repair of structures in service in a marine environment; repair of structural elements subject to repeated loading; repair in industrial premises in the presence of mineral oils, lubricants, etc.; repair of structures exposed to sulphates |
| Application temperature | +5…+30 °C |
| Key properties | modulus of elasticity: ≥25,000 MPa; density of hardened mortar: 2.2 ± 5 % t/m³; freeze-thaw resistance: F2 400; bond to substrate at 28 days: ≥2.5 MPa; water impermeability: W16; compressive strength at 28 days: ≥60 MPa; flexural strength at 1 day: ≥3 MPa; flexural strength at 28 days: ≥7 MPa; bond to substrate at 28 days after 50 freeze-thaw cycles in salts: ≥2.2 MPa; aggregate size: 2.5 mm; flowability (truncated cone spread on a flow table): 110–130 mm; flowability retention: 20–40 minutes; shrinkage: ~500 µm/m; compressive strength at 1 day: ≥30 MPa; capillary water absorption: no more than 0.4 kg/(m²·min⁰·⁵); sulphate resistance coefficient (365 days): 0.982 % |
| Shelf life | 12 months from the date of manufacture |
| Standards | class R4 per GOST R 56378 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Epolit — three-component epoxy grout for anchor pockets and equipment
Highly filled cold-curing epoxy for filling anchor pockets and grouting under turbines, compressors and pumps; 100 MPa in 7 days.
Price on request
REKS
REKS® R3 — class R3 repair mortar, 40 MPa, for interior and exterior work
Non-shrink thixotropic class R3 mortar for local repair and levelling of reinforced concrete in industrial buildings and tanks; compression from 40 MPa.
Price on request
REKS
REKS® Tikso — thixotropic mortar for repairing and levelling concrete and floors
Fibre-reinforced non-shrink mortar for repair, finishing and local levelling of concrete, including floors; flowability is retained from 60 minutes.
Price on request
REKS
REKS® Grip Ultra — dispersed grout for sleepers, posts and rebar
Grout in 19 kg bags for fixing sleepers in track concrete, installing railings and posts and fixing rebar; 10 MPa after 2 hours.
Price on request
REKS
REKS® AR FM — R4 repair mortar for wet spraying, supplied with fibre
Thixotropic class R4 mortar for repairing bridges, tunnels and columns by spraying or trowel; each bag comes with a pail of fibre, flexure from 12 MPa.
Price on request