REKS
REKS® Graut M — flowable non-shrink R4 grout for machine bases and anchors
Non-shrink highly flowable cementitious mix for grouting machine bases, fixing beams and columns and setting anchors; 60 MPa at 28 days.
Price on request
REKS
REKS® Tikso — thixotropic mortar for repairing and levelling concrete and floors
Repair and final finishing of concrete and reinforced concrete structures and levelling of surfaces in routine repair and new construction are carried out with REKS® Tikso. The non-shrink fibre-reinforced mortar with an aggregate size of 0.63 mm repairs dormant cracks with an opening of up to 1 mm, protects concrete against media containing sulphates, sulphides and chlorides, and is suitable for local levelling of floors under light and medium loads. Flowability is retained for at least 60 minutes, compressive strength at 28 days is from 40 MPa, water impermeability W16.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, tanks and treatment plants, tunnels and metro, floors |
| Base | non-shrink fibre-reinforced thixotropic cementitious mortar for repair and levelling of concrete surfaces |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | repair and final finishing of concrete and reinforced concrete structures; levelling of concrete surfaces in routine repair and in new construction; repair of dormant cracks with an opening of up to 1 mm; protection of concrete against aggressive media containing sulphates, sulphides, chlorides, etc.; local levelling of floors in civil and industrial buildings subject to light and medium loads |
| Key properties | modulus of elasticity: ≥15,000 MPa; density of hardened mortar: 2.0 ± 5 % t/m³; freeze-thaw resistance: F2 300; bond to substrate at 28 days: ≥1.5 MPa; water impermeability: W16; compressive strength at 28 days: ≥40 MPa; flexural strength at 1 day: ≥2.5 MPa; flexural strength at 28 days: ≥7 MPa; bond to substrate at 28 days after 50 freeze-thaw cycles in salts: ≥2 MPa; aggregate size: 0.63 mm; flowability (truncated cone spread on a flow table): 125–135 mm; flowability retention: ≥60 minutes; compressive strength at 1 day: ≥10 MPa; capillary water absorption: no more than 0.4 kg/(m²·min⁰·⁵); sulphate resistance coefficient (365 days): 0.9 % |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® R3 — class R3 repair mortar, 40 MPa, for interior and exterior work
Non-shrink thixotropic class R3 mortar for local repair and levelling of reinforced concrete in industrial buildings and tanks; compression from 40 MPa.
Price on request
REKS
REKS® Fiks Epo T/VN 100 — high-strength epoxy grout with freeze-thaw resistance F1 500
High-strength three-component epoxy grout for bridge bearings, equipment and rails; 80 MPa after just one day in flowable consistency.
Price on request
REKS
REKS® Fiks Akrep — chemical anchor for installation down to −15 °C
Two-component chemical anchor for rebar, studs and embedded parts in concrete, stone and brick at sub-zero temperatures; 410 ml cartridge.
Price on request
REKS
REKS® Fluid — rapid-hardening flowable R4 grout for work down to −10 °C
Fibre-reinforced flowable mix for grouting under bridge bearings and equipment foundations and repairing roads and airfields; 50 MPa after one day.
Price on request
REKS
REKS® Fiks Epo T/VN — filled epoxy grout in three consistencies
Three-component modified epoxy grout for base plates, bridges, rails and anchoring; the consistency is set by the proportion of filler.
Price on request