REKS
REKS® AR FM — R4 repair mortar for wet spraying, supplied with fibre
Thixotropic class R4 mortar for repairing bridges, tunnels and columns by spraying or trowel; each bag comes with a pail of fibre, flexure from 12 MPa.
Price on request
REKS
REKS® Fiks Akrep — chemical anchor for installation down to −15 °C
The chemical anchor REKS® Fiks Akrep is designed for work at sub-zero temperatures — down to −15 °C. It is used to bond deformed rebar, anchors, studs of any diameter and embedded parts into concrete of grades B15–B60, reinforced concrete, natural stone and brick in interior and exterior work; the anchor is supplied in 410 ml coaxial cartridges. At a substrate temperature of 0 °C the gel time is 3 minutes, at −5 °C 4.5 and at −15 °C 16.5 minutes; the minimum strength-gain time is 18, 24 and 32 hours, and compressive strength is at least 50 MPa.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | chemical anchors |
| Use | anchoring of rebar and bolts |
| Base | chemical anchor for sub-zero temperatures |
| Colour | grey |
| Packaging | coaxial cartridge of 410 ml supplied with a mixing nozzle.; cardboard box of 24 pcs |
| Application method | high-performance two-component chemical compound specially developed for reliable fixing of deformed rebar, anchors, studs of any diameter and other embedded parts in structures of concrete of grades B15–B60, reinforced concrete, natural stone and brick; intended for interior and exterior work at sub-zero temperatures down to −15 °C; use at lower temperatures is possible, but the gel time and the time to develop strength properties will increase. |
| Application temperature | substrate down to −15 °C (data for −15…0 °C); compound in the cartridge about +20 °C |
| Key properties | tensile strength: ≥12 MPa; compressive strength: ≥50 MPa; adhesion to metal: ≥3 MPa; gel time at substrate temperature −5 °C: 4.5 min; elongation at break: ≥5 %; gel time at substrate temperature 0 °C: 3 min; gel time at substrate temperature −15 °C: 16.5 min; adhesion to B25 concrete: exceeds the cohesion of concrete; minimum strength-gain time at 0 °C: 18 h; minimum strength-gain time at −5 °C: 24 h; minimum strength-gain time at −15 °C: 32 h |
| Shelf life | 10 months from the date of manufacture; storage at +5…+25 °C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Fiks Epo Tiks — epoxy-based chemical anchor for rebar and studs
Two-component epoxy chemical anchor for bonding rebar, anchors and studs of any diameter into B15–B60 concrete, stone and brick.
Price on request
REKS
REKS® PRAYMER — one-component primer for cleaned rebar before concrete repair
One-component primer with corrosion inhibitors for cleaned rebar before concrete repair; supplied in 5 and 10 kg pails and 20 kg bags.
Price on request
REKS
REKS® Fiks Epo Tiks O — epoxy chemical anchor in a 380 ml cartridge
Modified epoxy chemical anchor for rebar, studs and embedded parts in concrete, stone and brick; 380 ml coaxial cartridge.
Price on request
REKS
REKS® Fiks Epo T/VN — filled epoxy grout in three consistencies
Three-component modified epoxy grout for base plates, bridges, rails and anchoring; the consistency is set by the proportion of filler.
Price on request
REKS
REKS® Praymer Antikor — anti-corrosion rebar primer with corrosion inhibitors
One-component primer with corrosion inhibitors protecting steel rebar during repair of reinforced concrete, including where chlorides are present; 5 and 10 kg pails.
Price on request