REKS
REKS® StruktoFluid — flowable R4 mortar for roads, airfields and machine bases
Rapid-hardening fibre-reinforced flowable R4 mortar for roads, airfields, beams and slabs, machine bases and anchor fixing; compression from 65 MPa.
Price on request
REKS
REKS® Fiks Epo Tiks O — epoxy chemical anchor in a 380 ml cartridge
A 380 ml coaxial cartridge with a mixing nozzle is how the chemical anchor REKS® Fiks Epo Tiks O is supplied, 24 cartridges per box. The two-component modified epoxy compound fixes deformed rebar, anchors, studs and embedded parts in concrete of grades B15–B60, reinforced concrete, natural stone and brick in interior and exterior work. At substrate temperatures of +25, +20 and +15 °C the gel time is 8, 11 and 15 minutes, and the minimum strength-gain time is 6, 7 and 18 hours.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | chemical anchors |
| Use | anchoring of rebar and bolts |
| Base | chemical anchor based on modified epoxy resin |
| Colour | grey |
| Packaging | coaxial cartridge of 380 ml supplied with a mixing nozzle.; cardboard box of 24 pcs |
| Application method | high-performance two-component chemical compound specially developed for reliable fixing of deformed rebar, anchors, studs of any diameter and other embedded parts in structures of concrete of grades B15–B60, reinforced concrete, natural stone and brick; intended for interior and exterior work; use at lower temperatures is possible, but the gel time and the time to develop strength properties will increase. The temperature of the compound in the cartridge before use… |
| Application temperature | substrate +5…+25 °C; compound in the cartridge about +20 °C |
| Key properties | tensile strength: ≥12 MPa; compressive strength: ≥50 MPa; adhesion to metal: ≥5 MPa; gel time at substrate temperature 25 °C: 8 min; gel time at substrate temperature 15 °C: 15 min; minimum strength-gain time at 25 °C: 6 h; minimum strength-gain time at 15 °C: 18 h; elongation at break: ≥4 %; gel time at substrate temperature 20 °C: 11 min; minimum strength-gain time at 20 °C: 7 h; adhesion to B25 concrete: exceeds the cohesion of concrete |
| Shelf life | 18 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Torkret — dry mix for shotcreting mine workings and concrete
Ready dry mix for dry shotcreting of mine workings, rock bases and damaged concrete, brick and stone; compression from 45 MPa at 28 days.
Price on request
REKS
REKS® BS — thixotropic R3 mortar for final levelling of concrete
Non-shrink class R3 mortar for a smooth finish on new and repair of old concrete surfaces before protective coatings; aggregate size 0.315 mm.
Price on request
REKS
REKS® AKRILIK NV — compound for deep impregnation and strengthening of cracked concrete
Impregnating compound of components A and B for restoring the load-bearing capacity of concrete and repairing track concrete; tensile strength from 20 MPa.
Price on request
REKS
REKS® Fab-10P — fibre-reinforced concrete mix with crushed granite for pavement repair
Non-shrink R4 concrete mix supplied with crushed granite for repairing airfield and road pavements, industrial floors and bridge piers.
Price on request
REKS
REKS® R3 — class R3 repair mortar, 40 MPa, for interior and exterior work
Non-shrink thixotropic class R3 mortar for local repair and levelling of reinforced concrete in industrial buildings and tanks; compression from 40 MPa.
Price on request