REKS
REKS® Strukto 300 — rapid-setting R4 mortar for repair and joint filling
Thixotropic class R4 cementitious mortar for fast concrete repair and joint filling in industrial buildings and tunnels; from 30 MPa after one day.
Price on request
REKS
REKS® AKRILIK ELAST VN — acrylic polymer concrete for expansion joints and slab edges
A reduced modulus of elasticity — at least 250 MPa after one day and 500 MPa after 7 days — distinguishes the black two-component acrylic polymer concrete REKS® AKRILIK ELAST VN. It is used to fill expansion joints and create transition zones when constructing them, to repair edges of reinforced concrete pavement slabs and loosened sleepers, and to reduce impact loads from vehicle wheels on roads, airfields and bridges. The compound is intended for horizontal surfaces in interior and exterior work; compressive strength after 7 days is at least 15 MPa.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | other concrete repair materials |
| Use | roads and airfields, bridges and overpasses |
| Base | two-component, rapid-hardening, highly filled compound (polymer concrete) based on acrylic resins with a reduced modulus of elasticity |
| Colour | black |
| Packaging | kit 18 kg; plastic canister, component A — 3 kg; metal pail, component B — 15 kg |
| Application method | monolithic filling of expansion joints; creation of transition zones when constructing expansion joints; repair of loosened sleepers; repair of edges of reinforced concrete pavement slabs; reduction of impact loads from vehicle wheels; can be used in interior and exterior work on horizontal surfaces |
| Key properties | density: 2.2 ± 5 % t/m³; compressive strength at 1 day: ≥12 MPa; Taber abrasion resistance H18/1,000 rev/2,000 g: 0.2 g; compressive strength at 7 days: ≥15 MPa; gel time: 10 minutes; flexural strength at 1 day: ≥12 MPa; flexural strength at 7 days: ≥15 MPa; modulus of elasticity at 1 day: ≥250 MPa; modulus of elasticity at 7 days: ≥500 MPa; adhesion to metal: ≥6 MPa; adhesion to concrete: ≥2.5 MPa; pot life at +20 °C: 15 min |
| Shelf life | 6 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Fab-10P — fibre-reinforced concrete mix with crushed granite for pavement repair
Non-shrink R4 concrete mix supplied with crushed granite for repairing airfield and road pavements, industrial floors and bridge piers.
Price on request
REKS
REKS® Nabryzg — fibre-reinforced class R3 mortar for wet spraying
Non-shrink fibre-reinforced class R3 mortar for repairing concrete and reinforced concrete by wet spraying, including in large volumes; from 35 MPa.
Price on request
REKS
REKS® EPO INZH — low-viscosity epoxy for injecting cracks in concrete
Two-component epoxy injection resin for filling cracks and pores in concrete and masonry and restoring load-bearing capacity; compression from 70 MPa.
Price on request
REKS
REKS® StruktoLit — expanding cementitious binder for injection grouts and concrete
Highly flowable expanding binder for shrinkage-compensated mortars and concrete: repair of roads, airfields, bridges and masonry; 20 kg bag.
Price on request
REKS
REKS® Strukto 100 — thixotropic R4 repair mortar resistant to acidic media
Non-shrink fibre-reinforced R4 mortar for bridges, tunnels, dams and treatment plants, tested for resistance in liquid acidic aggressive media.
Price on request