REKS
REKS® Grip Ultra — dispersed grout for sleepers, posts and rebar
Grout in 19 kg bags for fixing sleepers in track concrete, installing railings and posts and fixing rebar; 10 MPa after 2 hours.
Price on request
REKS
REKS® OL — lightweight thixotropic R3 mortar for repairing soffits
The density of hardened REKS® OL is only 1.5 t/m³, so this non-shrink thixotropic mortar is chosen for overhead concrete surfaces and extensive damage where a low weight of the repair material matters. The mortar belongs to class R3 per GOST R 56378 and is used to repair elements of concrete and reinforced concrete structures in industrial buildings, on columns, beams, tanks and treatment plants. At 28 days compressive strength is at least 35 MPa and bond to the substrate from 1.5 MPa; packed in 20 kg bags.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams, tanks and treatment plants |
| Base | non-shrink lightweight thixotropic cementitious mortar for repair of overhead surfaces |
| Colour | grey |
| Packaging | bags 20 kg |
| Application method | repair of damaged elements of concrete and reinforced concrete structures; restoration of overhead concrete surfaces, as well as extensive concrete damage where the use of a lightweight material is essential |
| Application temperature | +5…+30 °C |
| Key properties | modulus of elasticity: ≥15,000 MPa; density of hardened mortar: 1.5 ± 5 % t/m³; freeze-thaw resistance: F2 200; bond to substrate at 28 days: ≥1.5 MPa; water impermeability: W16; compressive strength at 28 days: ≥35 MPa; flexural strength at 1 day: ≥1.5 MPa; flexural strength at 28 days: ≥4.5 MPa; bond to substrate at 28 days after 50 freeze-thaw cycles in salts: ≥1.5 MPa; aggregate size: 1.25 mm; flowability (truncated cone spread on a flow table): 140–150 mm; flowability retention: ≥20 minutes; compressive strength at 1 day: ≥10 MPa; capillary water absorption: no more than 0.4 kg/(m²·min⁰·⁵) |
| Shelf life | 12 months from the date of manufacture |
| Standards | class R3 per GOST R 56378 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Fab-10P — fibre-reinforced concrete mix with crushed granite for pavement repair
Non-shrink R4 concrete mix supplied with crushed granite for repairing airfield and road pavements, industrial floors and bridge piers.
Price on request
REKS
REKS® Fayber L — flowable repair mortar with metal fibre for work down to −10 °C
Rapid-hardening flowable R4 mortar with polymer and brass-coated metal fibre for roads, airfields and bridges; from 30 MPa after 2 hours.
Price on request
REKS
REKS® Akva Densit — epoxy compound for underwater repair and damp concrete
Epoxy repair compound for damp surfaces and underwater work on hydraulic, port and bridge structures; compression from 50 MPa.
Price on request
REKS
REKS® Torkret — dry mix for shotcreting mine workings and concrete
Ready dry mix for dry shotcreting of mine workings, rock bases and damaged concrete, brick and stone; compression from 45 MPa at 28 days.
Price on request
REKS
REKS® Litoy 110 — 110 MPa installation grout for wind turbine towers and equipment
High-strength rapid-hardening Portland cement grout with shrinkage compensators for wind turbines, bridges and equipment; 110 MPa at 28 days.
Price on request