REKS
REKS® Litoy — pourable R4 grout for bridge bearings and equipment
Low-viscosity non-shrink cementitious mix for high-precision grouting under columns, bridge spans and equipment foundations; 80 MPa at 28 days.
Price on request
REKS
REKS® Strukto R3 — rapid-setting class R3 mortar for repair and levelling
The repair and levelling mortar REKS® Strukto R3 belongs to class R3 per GOST R 56378: it is non-shrink, rapid-setting and fibre-reinforced, with an aggregate size of 1.25 mm. It is used for repair and finishing of concrete and reinforced concrete structures, levelling of surfaces in routine repair and new construction, local correction of horizontal and vertical areas and restoration of precast concrete elements. Flowability is retained for 5–15 minutes, compressive strength is at least 8 MPa after one day and 35 MPa after 28 days, water impermeability from W16.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams, tanks and treatment plants |
| Base | non-shrink rapid-setting fibre-reinforced thixotropic cementitious mortar for repair and levelling of concrete surfaces |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | repair and finishing of concrete and reinforced concrete structures; levelling of concrete surfaces in routine repair and in new construction; local levelling of horizontal and vertical surfaces; repair of precast concrete elements |
| Application temperature | +5…+30 °C |
| Curing | protection from precipitation for at least 24 h; in hot and windy weather — water spraying and covering with film |
| Key properties | modulus of elasticity: ≥25,000 MPa; density of hardened mortar: 2.25 ± 5 % t/m³; freeze-thaw resistance: F2 300; bond to substrate at 28 days: ≥1.5 MPa; water impermeability: ≥W16; compressive strength at 28 days: ≥35 MPa; flexural strength at 1 day: ≥2 MPa; flexural strength at 28 days: ≥6 MPa; bond to substrate at 28 days after 50 freeze-thaw cycles in salts: ≥1.5 MPa; aggregate size: 1.25 mm; flowability (truncated cone spread on a flow table): 115–130 mm; flowability retention: 5–15 minutes; compressive strength at 1 day: ≥8 MPa; capillary water absorption: no more than 0.4 kg/(m²·min⁰·⁵) |
| Shelf life | 12 months from the date of manufacture |
| Standards | class R3 per GOST R 56378 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Akrisil VN — rapid-hardening acrylic polymer concrete for work from −30 °C
Two-component highly filled acrylic resin polymer concrete for bridge bearings, screeds and rails; at least 95 MPa compression after 4 hours.
Price on request
REKS
REKS® Graut GP — low-viscosity pourable grout, 75 MPa
Non-shrink low-viscosity R4 grout for machine bases and fixing beams, columns and bolts; from 35 MPa after one day and from 75 MPa at 28 days.
Price on request
REKS
REKS® Fiks Akrep — chemical anchor for installation down to −15 °C
Two-component chemical anchor for rebar, studs and embedded parts in concrete, stone and brick at sub-zero temperatures; 410 ml cartridge.
Price on request
REKS
REKS® FIKS EPO T — two-component epoxy for anchoring and base plates
Multi-purpose epoxy for anchoring bars, bolts and barrier posts, base plates and rails; compressive strength from 90 MPa in 7 days.
Price on request
REKS
REKS® Grip Ultra — dispersed grout for sleepers, posts and rebar
Grout in 19 kg bags for fixing sleepers in track concrete, installing railings and posts and fixing rebar; 10 MPa after 2 hours.
Price on request