ALFAPOL RS — cement-based thixotropic repair mix
Cement-based thixotropic mix for repairing and levelling concrete substrates in workshops, wet rooms and open areas.

This ground mosaic concrete coating on Portland cement and crushed granite is suitable for public buildings, car parks and open areas. Abrasion is no more than 0.4 g/cm², compressive strength 40 MPa, flexural strength 8 MPa, water resistance W16, frost resistance F400, combustibility class NG. The colour is chosen from a standard list of tints; crushed stone is supplied in bags or big bags.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | floor material |
| Use | car parks and ramps, outdoor areas, retail and public, decorative |
| Base | Portland cement; Cement-based concrete mosaic granite coating (terrazzo) B40 W16 |
| Colour | List of standard tint colours |
| Packaging | Dry mix: polypropylene bag, 25 kg. Crushed granite*, polypropylene bag, 25 kg. *various packaging options: bags, big bags. |
| Application temperature | Application temperature: from +10°C to +25°C |
| Curing | Site foot traffic possible after: 10-12 hours |
| Key properties | Service temperature: from -50 to +50°C; Compressive strength at 28 days, min.: 40 MPa; Flexural tensile strength at 28 days, min.: 8 MPa; Bond strength to concrete, min.: 0.8 MPa; Abrasion, max.: 0.4 g/cm²; Water resistance grade: W16; Frost resistance grade: F400; Combustibility class, GOST 30244-94: NG (non-combustible); Max. aggregate size: 10 mm |
| Layer thickness | Layer thickness: from 30 to 100 mm |
| Consumption | Material consumption: 2.3 kg/m²/mm |
| Shelf life | Guaranteed shelf life of the dry mix under normal conditions in intact factory packaging is 6 months from the date of manufacture.; Shelf life: 6 months |
| Standards | TU 23.64.10-009-82166262-2025; TU 5745-009-82166262-2009; combustibility class per GOST 30244-94 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Cement-based thixotropic mix for repairing and levelling concrete substrates in workshops, wet rooms and open areas.
Matt polyurethane sealer, resistant to fading and ultraviolet, for protecting mineral and polymer floors.
Cement-based non-sparking thixotropic mix with fine aggregate for repair and finish levelling of substrates in workshops and outdoor areas.
Solvent-free epoxy primer for preparing mineral substrates for polymer floor coatings.
Concrete floor on crushed granite, resistant to oils and petrol, for workshops, warehouses, car parks and outdoor areas: 50 MPa, W16, F400.
Two-component epoxy impregnation that protects concrete from aggressive chemicals, eliminates dusting and hardens the surface.