ALFAPOL
ALFAPOL PU-1AS — conductive polyurethane primer
One-component conductive polyurethane primer for the electrically conductive layer in antistatic polymer floor systems.
Price on request
ALFAPOL
ALFAPOL EP-3VM — matt epoxy sealer for concrete floors
EP-3VM sealer is applied in one or two coats over EP-1VG primer, giving a matt protective concrete floor surface. The compound is solvent-free and resistant to water and chemical media; Taber abrasion is no more than 60 mg, bond strength to concrete 2 MPa. The coating is serviceable from −30 to +50 °C; at +20 °C it can be walked on after one day, with full load after 5 days.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | sealers and topcoats |
| Use | chemically resistant, outdoor areas, decorative |
| Base | epoxy; Matt epoxy sealer for concrete floors |
| Packaging | Kit of 2 components in metal and plastic containers: Component A – 3.3 kg. Component B – 8.0 kg. |
| Application temperature | Application temperature, °C: +10°C to +30°C |
| Curing | At 10 / 20 / 30 °C: foot traffic after 2 days / 1 day / 20 h, medium load after 5 / 3 / 1.5 days, full load after 7 / 5 / 3 days; Recoat interval, h, min.: 12 |
| Key properties | Taber abrasion (CS10/1000 g/1000 rev), max., mg: 60; Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: -30 to +50 |
| Consumption | Consumption, kg/m²: from 0.1; BY ROLLER: 0.1-0.15 kg/m² per coat (two coats recommended). |
| Shelf life | Shelf life in factory packaging – 6 months from the date of manufacture. |
| Standards | TU 20.16.40-003-82166262-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL VK — cement self-levelling finishing floor
One-component cement self-levelling floor for workshops, warehouses, retail buildings and areas with significant static loads.
Price on request
ALFAPOL
ALFAPOL TOP 100(i) — non-sparking dry topping for concrete
Dry non-sparking hardening mix for the top layer of freshly laid concrete in workshops, warehouses, car parks and open areas.
Price on request
ALFAPOL
ALFAPOL VB(i) — non-sparking cement concrete floor
Non-sparking concrete floor on crushed marble for workshops, warehouses and open areas: water resistance grade W16, frost resistance grade F300.
Price on request
ALFAPOL
ALFAPOL MB — magnesia industrial concrete floor
Non-shrink magnesia concrete floor on crushed granite for workshops, warehouses, retail and public buildings, abrasion up to 0.4 g/cm².
Price on request
ALFAPOL
ALFAPOL ShP+ — magnesia finishing skim coat for floors
Non-shrink magnesia skim coat for thin-layer levelling and repair of potholes, chips and cracks in mineral floors.
Price on request