Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ALFAPOL EP-1GM — epoxy primer for concrete floors
ALFAPOL

ALFAPOL EP-1GM — epoxy primer for concrete floors

Floor primers

EP-1GM primer prepares a mineral substrate for polymer coatings: it penetrates concrete, strengthens it and improves its resistance to water and chemical media. The two-component kit is supplied in metal containers and contains no solvent. Bond strength to concrete is at least 2 MPa; at +20 °C the primed surface can be walked on after 12 hours, and the next layer is applied no earlier than 12 hours later.

Specifications

ManufacturerALFAPOL — OOO “ALFAPOL”, Saint Petersburg
Typefloor primers
Useoutdoor areas
Baseepoxy; Epoxy primer for concrete floors
PackagingKit A + B in metal containers: Component A – 16 kg, Component B – 2.6 kg.
Application temperatureApplication temperature, °C: +10°C to +30°C
CuringAt 10 / 20 / 30 °C: foot traffic after 24 / 12 / 6 h, medium load after 3 / 2 / 1 days, full load after 5 / 4 / 2 days; Recoat interval, h, min.: 12; Foot traffic, h, min.: 24; Full cure, days, min.: 7
Key propertiesBond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: from -30 to +50
ConsumptionConsumption, kg/m²: from 0.165; Consumption depends on the absorbency of the substrate, approx. from 170 g/m² per coat.
Shelf lifeShelf life in factory packaging – 6 months from the date of manufacture.; Shelf life, months: 6
StandardsTU 20.16.40-003-82166262-2015

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ALFAPOL