LITSIL® D40 — organometallic dyes for tinting concrete
Dye concentrates for tinting polished concrete indoors, diluted with water or acetone.

This water-based chemical hardener with a solids content of 27 % is designed for low-grade concrete, cement-sand screeds and terrazzo floors. It is also used to prepare the substrate for polymer coatings. According to the manufacturer, the surface becomes 1.5–2 times stronger, and the impregnation penetrates to 10 mm or more. Before application, the concrete is ground with 50–100 grit abrasive.
| Manufacturer | LITSIL — OOO “Litium”, Noginsk |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | production workshops, warehouses and logistics, retail and public buildings |
| Base | water-based chemical hardener; VOC 0 % |
| Colour | colourless opalescent liquid |
| Packaging | 20 l canisters, 200 l drums, 1000 l IBC containers |
| Application method | spraying (low-pressure pump sprayer) with spreading by brush or rotary machine; remove excess after 30 min; grinding 50–100 grit |
| Key properties | solids content 27 %; density 1.23 g/cm3; pH 10.4; viscosity 17 mPa·s; surface strengthening of concrete by 1.5–2 times; penetration up to 10 mm or more |
| Consumption | 0.2–0.30 l/m2 |
| Shelf life | 2 years from the date of manufacture, indoors at +4…+35 °C in the original packaging; do not freeze; use opened containers within 1 month |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Dye concentrates for tinting polished concrete indoors, diluted with water or acetone.
Violet lithium impregnation for fresh concrete: it is sprayed ahead of the power trowel, and you can see at once where it has already been applied.
Organosilicon finish with 100 % solids for polished concrete, giving a 'wet look' and repelling water, oil and dirt.
Lithium polysilicate impregnation that hardens concrete, reduces water absorption and protects against dirt, including on outdoor areas.
Solvent-based water repellent for concrete, brick, ceramics, paving slabs, stone and plaster, including on outdoor areas.
Water-based binder mixed with Portland cement and rubbed into ground concrete to fill cavities, pores and potholes.