LITSIL® S44 — two-component repair compound for concrete floors
Fast-hardening 1:1 polymer compound for repairing joints, cracks, spalls and potholes in concrete, terrazzo floors and toppings.

This deep-penetrating solvent-based water repellent protects concrete, brick, ceramics, paving slabs, stone and plaster from water. On floors, it is used primarily on outdoor concrete areas. It is applied by spraying, brush or rotary machine. The product’s freezing point is −15 °C, and it can be stored at −15…+30 °C for 1 year.
| Manufacturer | LITSIL — OOO “Litium”, Noginsk |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | outdoor areas |
| Base | solvent-based water repellent |
| Colour | clear liquid |
| Packaging | 20 l canisters, 200 l drums, 1000 l IBC containers |
| Application method | spraying, brush or rotary machine |
| Key properties | density 0.79 g/cm3; freezing point −15 °C |
| Consumption | 0.20–0.35 l/m2 (ground concrete); ceramic brick up to 0.30–0.50 l/m2 |
| Shelf life | 1 year from the date of manufacture at −15…+30 °C in the original packaging |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Fast-hardening 1:1 polymer compound for repairing joints, cracks, spalls and potholes in concrete, terrazzo floors and toppings.
Water-based impregnation for low-grade concrete, cement-sand screeds and terrazzo floors; the surface becomes 1.5–2 times stronger.
A set of 7 basic ready-to-use dyes for colouring ground concrete in retail and decorative interiors.
Dye concentrates for tinting polished concrete indoors, diluted with water or acetone.
Water-reducible polish for polished concrete with water, oil and chemical resistance and increased abrasion resistance.
Lithium impregnation with hybrid polymers for curing fresh concrete to ASTM C 309, adding gloss and protection against oils.