Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Epoksol — water-epoxy primer-impregnation with antiseptic
KRASKO

Epoksol — water-epoxy primer-impregnation with antiseptic

Concrete impregnations and hardeners

Epoksol contains no organic solvents, is non-flammable and odourless, which is why the manufacturer recommends it for children’s, pre-school and medical facilities. The impregnation penetrates concrete up to 5 mm, forms a vapour-permeable waterproof layer and, thanks to its antiseptic components, neutralises mould and fungus. It serves as a primer for Epostoun and Epostoun-Ultra water-epoxy enamels, and waterborne finish coats can be applied after just 3 h.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typeconcrete impregnations and hardeners
Useproduction halls, warehouses and logistics, food and pharmaceutical, wet rooms, retail and public
BaseTwo-component water-epoxy primer-impregnation: epoxy resin with antiseptic active components and functional additives, water; free of organic solvents
ColourColourless
Packaging20 kg (available from one package)
Application methodPriming and protection of concrete floors, concrete and brick walls in dry and wet rooms. No thinning; standing time after mixing at least 10 min; 1–3 coats by brush, roller or air spraying onto a dry cleaned surface; interval between treatments 3–24 h at 20 °C; waterborne finish coats — after 3 h at 20 °C, but no later than 2 days; solvent-borne ones — after the surface moisture has dropped to the standard level (usually at least 7 days). Systems with Epostoun, Epostoun-Ultra and Betolast water-epoxy self-levelling floor.
Application temperaturenot below +5 °C (surface and air)
CuringRecoat interval 3–24 h at 20 °C; waterborne coatings — after 3 h
Key propertiesPot life after mixing at least 4 h; standing time after mixing at least 10 min; penetration depth up to 5 mm; non-flammable (free of organic solvents); vapour-permeable (“breathable”) waterproof layer
ConsumptionFirst treatment — 300–400 g/m² (concrete M200–M350); repeat treatment — 100–200 g/m²
Shelf life12 months from the date of manufacture; storage from +5 °C to +35 °C
StandardsTU 20.30.11-005-01524656-2017; expert opinion; preparation to SP 29.13330.2011 and SP 71.13330.2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO