Wetisol (INGRI)
Wetisol S-MP3 — primer for polyurea on PVC and metal
Polyurethane primer for polyurea and polyurethane coatings on metal, PVC roofs, bitumen and concrete; intermediate coat for LAM 361 mastic.
Price on request
Wetisol (INGRI)
WETISOL S Clean — flushing and preservation of spraying equipment
WETISOL S Clean removes residues of isocyanates and polyetheramines from spray waterproofing rigs and lubricates them at the same time. The compound is used to flush equipment before work after a long downtime, to preserve it at the end of work, and to clean pumps and tools after WETISOL I-5115, I-5020, I-5137, I-5107 FG injection resins and S-MP primers. The benzoate- and glutarate-based liquid is low-toxic, biodegradable and safe for rubber and plastic parts; its flash point is 214 °C. Packaging — 5, 20 or 25 kg.
Specifications
| Manufacturer | Wetisol (INGRI) — OOO “Ingri” |
|---|---|
| Type | waterproofing material |
| Base | system based on benzoates and glutarates |
| Colour | transparent colourless liquid with a slight odour |
| Packaging | 5, 20 or 25 kg |
| Application method | removal of isocyanate and polyetheramine residues from spray waterproofing rigs and their lubrication; flushing before work after a long downtime (leak check, pump lubrication) and preservation of equipment after work; cleaning of pumps and tools after WETISOL I-5115, I-5020, I-5137, I-5107 FG injection resins and S-MP primers; shake for 2–3 min before use without opening; flush until the components are completely displaced, then drain and fill the rig with clean S-Clean |
| Key properties | density (20 °C) 0.970 g/cm³; flash point 214 °C; auto-ignition temperature over 350 °C; vapour pressure (20 °C) less than 0.001 kPa; solubility in water insignificant; viscosity (20 °C) 108 mm²/s; low-toxic and biodegradable; safe for rubber and plastic parts; lubricating properties |
| Consumption | about 10–12 l at a pump output of 3.4 l/min, hose length of 15 m and temperature of +10…+20 °C (depends on hose length, pump type and weather) |
| Shelf life | 1 year from the date of manufacture in unopened undamaged original containers, preferably at +10…+20 °C |
| Standards | toxicity — class 3 per GOST 12.1.005-88 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Wetisol (INGRI)
Wetisol (INGRI)
WETISOL I-5020 — injection resin with rigid foam
Water-reactive polyurethane resin forming a rigid foam on contact with water: stops water inflows with pressure up to 0.5 atm and strengthens soil.
Price on request
Wetisol (INGRI)
Wetisol I-5115 — water-reactive polyurethane resin with elastic foam
Injection resin that turns into an elastic foam on contact with water: stops water inflows and fills voids in structures.
Price on request
Wetisol (INGRI)
WETISOL Ecto 1K Hard — rigid coating waterproofing
Cementitious coating waterproofing for tanks, pools and foundations without movement: W16 under positive and W8 under negative pressure, bond from 1.7 MPa.
Price on request
Wetisol (INGRI)
WETISOL I-5137 — fast-foaming resin against pressurised water
Low-viscosity water-reactive polyurethane resin for stopping pressurised water, including sea water, and emergency leaks; foam rises in 20–24 s.
Price on request
Wetisol (INGRI)
Wetisol Spray 400 — hot-spray polyurea
Sprayed polyurea for foundations, tanks, roofs and bridges: a seamless membrane with 350–450% elongation, working from −60 to +90 °C.
Price on request