AKVASTOP
AKVASTOP KhVN waterstop — internal waterstop with a swelling cord
Internal PVC-P waterstop with a swelling rubber cord for construction joints and floor-to-wall junctions; water pressure up to 0.97 MPa.
Price on request
AKVASTOP
AKVASTOP DZS waterstop — tie-in waterstop for connecting structures
The task of the DZS waterstop is to seal the expansion joint where a new structure adjoins an existing one. The profile is U-shaped and made only of PVC-P in two sizes: DZS-140/50-2/40 and DZS-140/100-2/40. Permissible movements are 25 mm in compression, 150 mm in tension, 130 and 95 mm in transverse and longitudinal shear at water pressure of 0.43 MPa; it is supplied in 20 m coils.
Specifications
| Manufacturer | AKVASTOP — OOO “Akvabarier” |
|---|---|
| Type | waterstops and swelling profiles |
| Use | foundations and basements, tunnels and metro, joints and junctions, leak repair |
| Base | extruded profile; material: PVC-P |
| Packaging | coils of 20 linear m |
| Application method | installation according to technological regulation TR 186-07 |
| Key properties | sizes: DZS-140/50-2/40, DZS-140/100-2/40; movements (compression/tension/transverse shear/longitudinal shear) 25/150/130/95 mm; permissible water pressure 0.43 MPa; materials: PVC-P (TU 5772-001-58093526-11): Shore A hardness 70±5, tensile strength at break at least 10 MPa, elongation at least 320 % (at −20 °C at least 200 %), water absorption not more than 0.25 %, density not more than 1.35 g/cm3, brittleness temperature not higher than −40 °C, combustibility group G4, weldability ≥0.6 (DIN 18541-2), service temperatures −37…+70 °C; PVC-PK-MBS variant (oil- and petrol-resistant, TU 32.99.59-009-58093526-2018): strength at least 10 MPa, elongation at least 300 %, service temperatures −37…+70 °C |
| Shelf life | store in closed rooms at a temperature not higher than +30 °C, without deforming loads, direct sunlight, petroleum products and solvents; guaranteed shelf life 2 years from the date of manufacture; guaranteed service life 5 years |
| Standards | waterstops — TU 5775-02-46603100-03 amend. 1, 2 (extrusion); materials — TU 5772-001-58093526-11 (EPDM rubber, PVC-P) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by AKVASTOP
AKVASTOP
AKVASTOP UV, UVS waterstop — waterstop for shrinkage joints
Waterstop for forming and sealing planned shrinkage joints by deliberately weakening the concrete section.
Price on request
AKVASTOP
AKVASTOP KhO waterstop — external formwork waterstop for construction joints
External formwork-type waterstop for construction joints in concreting; permissible water pressure 0.21–0.47 MPa.
Price on request
AKVASTOP
AKVASTOP DOM waterstop — expansion-joint waterstop for membrane systems
External PVC-P expansion-joint waterstop designed to work together with waterproofing membranes; joint tension up to 120 mm.
Price on request
AKVASTOP
AKVASTOP DO waterstop — external formwork waterstop for expansion joints
External formwork waterstop for expansion joints in foundations, basements and tunnels, rated for water pressure of 0.28–0.47 MPa.
Price on request
AKVASTOP
AKVASTOP DZ waterstop — U-shaped waterstop for expansion joints
Universal U-shaped waterstop for new and existing expansion joints; the DZ-140/100 profile accommodates joint tension of up to 250 mm.
Price on request