A semi-gloss primer-enamel based on varnish with a drier, designed for application to steel and cast iron with residual mill scale and tight rust. The coating is intended for steel structures operating in an industrial atmosphere with aggressive gases, including chemical plants. One material replaces a separate primer and enamel and gives a semi-gloss surface.
| Manufacturer | Russkie Kraski (Prodecor) — AO “Russkie Kraski”, Yaroslavl |
|---|---|
| Type | primer-enamels |
| Use | steel structures, chemical plants |
| Base | one-component, varnish with a drier |
| Colour | semi-gloss finish |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Polyester-based polyurethane enamel resistant to 10 % sodium hydroxide and sulphuric acid solutions; with Prodecor 2103 primer — C5I per ISO 12944.
Matt primer-enamel for bridges, concrete and reinforced concrete structures in aggressive environments, applied at temperatures down to −10 °C.
Acrylic polyurethane topcoat for steel structures and bridges, weather- and UV-resistant; in systems with Prodecor 2104 ZN it lasts more than 25 years.
Epoxy primer-enamel for aggressive industrial atmospheres: a stand-alone two-coat coating or the intermediate coat of a bridge system.
Zinc-rich primer with more than 85 % metallic zinc in the coating for bridges, power line towers and equipment in an industrial atmosphere.
Fire- and explosion-safe water-dispersion primer for steel structures: dries quickly; with Prodecor WB 1302 enamel it lasts up to 7 years.
