A two-component topcoat enamel based on a hydroxyl-containing acrylic resin and polyisocyanate, i.e. of the acrylic polyurethane type. It is applied as the top coat over primed metal, concrete and reinforced concrete structures. The coating is weather-resistant and resistant to ultraviolet radiation, so it is suitable for structures in the open air.
| Manufacturer | Russkie Kraski (Prodecor) — AO “Russkie Kraski”, Yaroslavl |
|---|---|
| Type | polyurethane enamels |
| Use | steel structures, concrete |
| Base | two-component acrylic polyurethane (hydroxyl-containing acrylic resin + polyisocyanate) |
| Key properties | Weather and UV resistance |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Polyester-based polyurethane enamel resistant to 10 % sodium hydroxide and sulphuric acid solutions; with Prodecor 2103 primer — C5I per ISO 12944.
Fast-drying one-component primer-enamel for framed buildings and antenna-mast structures, forming a stand-alone single-coat coating.
Acrylic polyurethane topcoat for steel structures and bridges, weather- and UV-resistant; in systems with Prodecor 2104 ZN it lasts more than 25 years.
Epoxy zinc-rich primer for bridges, power line towers and tank exteriors; systems with Prodecor 2302 enamel last more than 25 years.
Fire- and explosion-safe water-dispersion enamel for the finish painting of steel structures; with Prodecor WB 1104 primer it lasts up to 7 years.
One-component alkyd primer for steel structures and equipment, recommended for shop application under various enamels.
