A polyurethane enamel on polyester resin with Prodecor 2303 hardener, designed for aggressive environments. The coating withstands 10 % solutions of sodium hydroxide and sulphuric acid and is weather- and UV-resistant. In a system with Prodecor 2103 primer it meets corrosivity category C5I per ISO 12944, and the service life of this system is over 15 years.
| Manufacturer | Russkie Kraski (Prodecor) — AO “Russkie Kraski”, Yaroslavl |
|---|---|
| Type | polyurethane enamels |
| Use | steel structures, chemical plants |
| Base | two-component polyurethane on polyester resin; hardener Prodecor 2303 |
| Key properties | Corrosivity category C5I per ISO 12944 (in a system with Prodecor 2103), Withstands 10 % solutions of sodium hydroxide and sulphuric acid, Service life of the Prodecor 2103 + Prodecor 2303 system: over 15 years |
| Compatible materials | Prodecor 2103 primer |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Acrylic polyurethane topcoat for steel structures and bridges, weather- and UV-resistant; in systems with Prodecor 2104 ZN it lasts more than 25 years.
Two-component epoxy primer-enamel for marine and river hydraulic structures, ports and water conduits, working under water and in soil.
Fast-drying one-component primer-enamel for framed buildings and antenna-mast structures, forming a stand-alone single-coat coating.
Two-component phosphating primer for the initial priming of metals, with adhesion to various metals.
Matt primer-enamel for bridges, concrete and reinforced concrete structures in aggressive environments, applied at temperatures down to −10 °C.
Zinc-rich primer with more than 85 % metallic zinc in the coating for bridges, power line towers and equipment in an industrial atmosphere.
